AOD thoughts/recommendations Getting ready to go back to the track and wanted some thoughts. For the last 25 years all my cars have had manuel valve...
11 Replies
September 04, 2017, 02:20:49 PM
turbo coupe vs ls prop valve hey guys
just starting my tc axle swap today on my 87 cougar and was thinking, would it be easier to swap the internals...
2 Replies
September 01, 2017, 07:24:23 AM vinnietbird
13 Replies
August 29, 2017, 03:46:30 PM thunderjet302
8 Replies
August 10, 2017, 10:25:03 PM rotorr22
reverse lights not working I have a 1985 Cougar 3.8l v6 with a C5 tranny. I recently replaced my transmission and my reverse lights worked fine for...
7 Replies
July 23, 2017, 01:00:13 PM softtouch
3 Replies
June 27, 2017, 04:36:15 PM rotorr22
Mustang 8.8 Swap clearence Last week i found a good deal on a Mustang 8.8 with 4.10's so i went ahead and got it and decided i would install it. I was...
3 Replies
June 27, 2017, 09:12:16 AM Aerocoupe
T5 5th gear vibration I also have this vibration, ONLY in 5TH gear, so the clutch.pressure plate,t bearing, and the pilot can be eliminated as the...
3 Replies
June 07, 2017, 01:22:05 AM rotorr22
9 Replies
May 27, 2017, 11:40:27 AM thunderjet302
2 Replies
May 25, 2017, 06:54:43 PM Moonmount
tc rear 5 lug conversion so I was looking at coolcats and it seems to say that with a tc rear, you can use 94-98 mustang axles and 91-92 mark vii...
10 Replies
May 02, 2017, 06:17:59 PM Aerocoupe
4 Replies
May 01, 2017, 03:54:55 PM Aerocoupe
AOD gear shift selector A friend of mine is welding up frame connectors and a few things on his lift for my '88 thunderbird. I asked him to check...
2 Replies
April 23, 2017, 07:58:32 AM Matt Jewell
6 Replies
April 13, 2017, 01:21:02 PM tommym
Diff oil d8dz-19c547-a Can any one confirm the oil grade I have 80-90w gl4 as a cross reference also what is that bloody big chunk of metal that...
4 Replies
April 07, 2017, 01:59:29 AM V8Demon
0 Replies
April 06, 2017, 04:45:53 PM Moonmount
Mustang AOD My 3/4 finally went out what exactly do i need to do to a mustang aod to get it to work in a column shift 5.0 88 cougar
2 Replies
March 25, 2017, 02:56:18 AM Moonmount
Master cylinder choices.... Going to do the Turbo Coupe brakes and rear end swap. Which master cylinder should I use? 93 Cobra MC, or a 94/95 Mustang...
12 Replies
March 21, 2017, 06:10:25 PM vinnietbird
Rear end noise I have a lot of noise in the rear end of my car, sometimes it sounds like the differential other times it sounds like a...
11 Replies
March 02, 2017, 07:29:03 AM CatWoman
Axle bearings Alright so I ordered timken fc66998 bearings as they said they're the correct part but they're definitely not way too large...
7 Replies
February 24, 2017, 07:51:59 PM Haystack
