Skip to main content ↑ ↓
Topic: Project Evolution *** Project Complete **** Wednesday July 9, 2014 (Read 1531016 times) previous topic - next topic

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #705 –
Quote from: DVP;247297
Im glad you didnt buy another car. Its fun to see the insides of our cars. Plus Im learning ALOT. Will the Zero Rust stop the rust? Its not bad but if I keep it I would like it to not get worse.


If you se the scaled rust off and coat it good, it will stop it from rusting any more.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #706 –
Quote from: daminc;247296
Project is temporarily on hold, due to my dad passing away unexpectedly.


What ??????
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #707 –
Quote from: daminc;247296
Project is temporarily on hold, due to my dad passing away unexpectedly.


My condolences

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #708 –
Jerry, Our Thoughts and Prayers are with you in this time of sorrow my Condolences to you & your Family. God Bless !!! :(

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #709 –
Sorry for your loss.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #710 –
My family will keep you and yours in our prayers.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #711 –
I wish the best for you man. I am truely sorry to hear about your loss.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07
 

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #712 –
My condolences to you and your family, Jerry...
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #713 –
X2
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #714 –
I am extremely sorry to hear about the loss of your father. I'll keep you in my thoughts and prayers!

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #715 –
Im sorry for your loss jerry,i can only imagine how you feel right now.
2001 Buick Regal LS (DD):hick:

Got that fox rash again!

-Resident smartass! :ies:

- Don't listen to the naysayers. For every person who actually helps with your project there will be 10 who will discourage you all the while thinking that they are helping. 99% of all people have good intentions. That doesn't make them right.- XR7 Dave - SCCOA.Com

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #716 –
Sorry for your loss. Family is more important than cars ever will be. Come back to the car when you're ready. It will still be there.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #717 –
sorry to hear about your loss.... my prayers are with you
[/IMG]
Just enjoyin the ride!!!!

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #718 –
In my thoughts and prayers man...
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #719 –
sorry to hear this.
Never drive faster than your guardian angel can fly.
:birdsmily: :birdsmily: :birdsmily::birdsmily: 
  [SIGPIC][/SIGPIC]
:birdsmily: :birdsmily: :birdsmily::birdsmily:
1983 base model,1969 302 (originally a v6),upraded c5,currently 30,441 original miles.