Skip to main content
Topic: got me some new tires (Read 4847 times) previous topic - next topic

Rears are on!!!!!

Reply #30
I finally got my new tires mounted and they, look to be a little tall which is what I wanted.
Not bad $315.00 and I got a little more tread then before.:punchballs:




Do you think I could make it to cat jam on these!!!LOL
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

got me some new tires

Reply #31
Somebody's been using all the power they have.  Those tires are well used.
Armed Forces Car Club
Eastern Sierra Chapter, California
WEB:  armedforcescarclub.com

 

got me some new tires

Reply #32
Quote from: tbirdsps;360075
Somebody's been using all the power they have.  Those tires are well used.

sad thing is they only have 5 to 6,000 miles on them, but I've had them since 2004.lol
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

got me some new tires

Reply #33
So the tires are very close to the top of the wheel well coming up the driveway, so I will have to be very careful....:punchballs:
Sorry for all the pictures, but I think it helps others on picking wheel, and tire size, at least it did for me.lol


I have 27-1/2 from the ground in the rear and 26-1/2 in the front


1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/