Re: fog lights wont work Reply #15 – July 03, 2005, 01:54:05 PM havent replaced the switch, but I have taken it apart to see if everything looked normal. Quote Selected
Re: fog lights wont work Reply #16 – July 05, 2005, 07:21:33 PM thinking about hard wiring the fog light switch... any pros-cons to doing this? Quote Selected
Re: fog lights wont work Reply #17 – July 05, 2005, 10:15:12 PM Use a relay,and good wire.Not that thin stuff.Also,solder the wires,and use heat shrink due to the wetness that can occur under the hood. Quote Selected
Re: fog lights wont work Reply #18 – July 11, 2005, 08:36:48 PM when I tried to jump the foglight switch it arced like both wires were grounded. could a bad relay do that? I guess I need to take it apart and look further. Quote Selected
Re: fog lights wont work Reply #20 – July 12, 2005, 08:31:09 AM Just a question. Are you running higher wattage headlight bulbs? If so, you need to re wire the system with a relay, or you are going to be destroying headlight switches left and right. Its worth the effort, because he stock switch is barely adequate for the stock system. Quote Selected
Re: fog lights wont work Reply #21 – July 12, 2005, 08:32:36 PM I dont know what bulbs I have. I bought them from the junk yard when I got my engine Quote Selected
Re: fog lights wont work Reply #22 – August 08, 2005, 08:55:51 PM tested bulbs tonight and bulbs are good, still no power to the switch. where does the power for the fog switch come from? I didnt notice any wires with the same colors going to the headlight switch when I had it apart today. Quote Selected
Re: fog lights wont work Reply #24 – October 06, 2005, 01:03:25 PM power to the fox light switch comes from the headlight switch Quote Selected
Re: fog lights wont work Reply #25 – October 06, 2005, 01:09:46 PM here we go, check fuse position number 7, its a blue, 15A fuse, its for your fog lights onlyyour fog light switch will only get power when the headlights are on, and only the low beams Quote Selected