Skip to main content ↑ ↓
Topic: 5.0L upper plenum plate (Read 1123 times) previous topic - next topic

5.0L upper plenum plate

Looking for another 5.0L upper plenum plate. Let me know which one you have. Pics would be nice.
88 Thunderbird 5.0L
[/SIZE]

5.0L upper plenum plate

Reply #1 –
Ive got several, Ill try to get some pics.  You can sand the paint off whatever else you want on the painted black one.
Mike

5.0L upper plenum plate

Reply #2 –
Ttt
Mike

5.0L upper plenum plate

Reply #3 –
if you have another extra i could use one. pm price with shipping. thanks

5.0L upper plenum plate

Reply #4 –
Ill grab some more at the yard next time.  If Tyler doesnt want one Ill let you know.
Mike

5.0L upper plenum plate

Reply #5 –
thanks, will both fit or each diffrent? mines the black one.

5.0L upper plenum plate

Reply #6 –
I've got a few,but they are all in the process of being polished.They'll go for about $35-$40 each depending on which one a person wants.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0L upper plenum plate

Reply #7 –
Quote from: birdman7;323394
thanks, will both fit or each diffrent? mines the black one.


They both fit.
Mike

5.0L upper plenum plate

Reply #8 –
Quote from: vinnietbird;323395
I've got a few,but they are all in the process of being polished.They'll go for about $35-$40 each depending on which one a person wants.


You got any with just 2 holes?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

5.0L upper plenum plate

Reply #9 –
Quote from: daminc;323471
You got any with just 2 holes?


For the Explorer upper? Here's the easy trick I did. I just cut the heads off two screws and glued them in the extra holes on the plate. You can't tell when the plate is installed that only two screws are holding it on ;)
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

5.0L upper plenum plate

Reply #10 –
what's wrong with just putting a plate that has 2 holes back on.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

5.0L upper plenum plate

Reply #11 –
I made my own from aluminum sheet.polished,smooth,and only two holes.Took about ten minutes to cut and drill the holes,then about an hour to smooth and polish it.FREE as well.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0L upper plenum plate

Reply #12 –
I was thinking about re-machining a plate anyway, so If I had an explorer 2 hole plate, it's not really going to matter. Anyone got a 2 hole'r they want to give a new home
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

5.0L upper plenum plate

Reply #13 –
Quote from: daminc;323484
what's wrong with just putting a plate that has 2 holes back on.


It limits your "style" selection;) If you're making your own plate you can do what ever you want though:D
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

5.0L upper plenum plate

Reply #14 –
I'll sell this one for $13 shipped  to the lower 48 of the  USA
Fox-less at the moment