Skip to main content ↑ ↓
Topic: Fila Progress Thread ( reviesed and minus all the BS) 56K death (Read 7133 times) previous topic - next topic

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #15 –
I'm going to guess you painted the air cleaner flat black.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #16 –
you used steelwool to remove the rust on the aircleaner :hick: then you cleared it for protection ;)

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #17 –
Hey I thought equal length shorty headers had issues with our cars?  I have a set of MAC ones laying around I may put to use now....

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #18 –
Graham... Nope. I steelwool on the valve covers. They had some " funky" stuff on them.
 
RJ... I've had teh equal legnth's for a while. They do fit but it's very close on the shifter linkage.

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #19 –
My only suggestion is to replace the fuel pump. I had the same one on my car, and after changing the heads, cam, intake and switching to the 4 barrell it wasn't enough. When I would punch it from a dead stop, it would get to about 45 and then lean out. I have since switched to this one SUM-250024-1 from Summit. I haven't had it back to the track yet, and won't this year. But just from playing around with it at my buddy's house (he has a really long drive way) it has made a huge improvement. Also it is a direct replacement.

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #20 –
is that fuel filter off a lawnmower?
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #21 –
Engine is really looking nice Mikey.
It's been a while since I've seen it, I'm impressed.:cheers:

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #22 –
that's the cleanest i've ever seen you engine bay.  nice job, man.
91 ranger 2.3 turbo - nowhere near stock
87 thunderbird turbocoupe
06 pontiac g6 gt
:birdsmily:
 

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #23 –
Wow... wish mine looked like that!

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #24 –
Looks a LOT better now Mikey.  Did you move that Rustang symbol from the hood bracing onto the top of the air cleaner lid?
'86 cougar gone to the big yard.
'86&'88 Jeep Comanches.

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #25 –
Quote from: venom_cat_86;175966
Looks a LOT better now Mikey. Did you move that Rustang symbol from the hood bracing onto the top of the air cleaner lid?

 
+1!!! Just a stupid little thing I did.
 
Quote from: 32VFoxBird;175938
is that fuel filter off a lawnmower?
Nope, a NAPA universal carb fuel filter. Cheapest money cab buy. Better to come later
 
Quote from: tc²;175963
Wow... wish mine looked like that!
No ya don't;)

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #26 –
why put MUSTANG symbol on the air cleaner lid. Wishing you had a real ford now are you? J/P. Im starting a job sometime this week i HOPE, so ill have money to send that carb your way!!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #27 –
Bro, i told ya I'd cover that carb. And everything else. Good news for you though, I found a 88? LSC floatin around my town. Grey with grey int. Talked to the guy at Mikey D's and got his number. I'll try to see if he has a parts stash for ya.
 
Back to the thread....I haven't done much. Gathering parts for my next few ideas. I hope to try to clean up the 85-6 tail light lenses and have them test fitted on soon enough

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #28 –
OK then ill get it boxed and a price on shipping for you asap!
and thanks PM me if you find out anything!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Fila Progress Thread ( reviesed and minus all the BS) 56K death

Reply #29 –
Will do Mini-me. I'll try to snag some pics as well