Skip to main content ↑ ↓
Topic: Foxtbirdcougarforums Top 25 ET List! (Read 75221 times) previous topic - next topic

Foxtbirdcougarforums Top 25 ET List!

Reply #330 –
No changes to the car? Probably making more power now that the weather is getting cooler. Nice run.

turbo charged 94 Cobra engine/440cc injectors/megasquirt /5 speed swapped (T5)/maxbox upper intake/70mm PP throttle body/AJE coilovers/2003 Mustang control arms/S.T. sway bars/ES rear control arm bushings/11" brake conversion/manual rack conversion/8.8 TC rear with rear discs and a welded diff/3.73 gears/PLX wideband/199mph speedometer/Aeromotive FPR/CNC hydraulic hand brake/cobra R wheels/....ect.

Foxtbirdcougarforums Top 25 ET List!

Reply #331 –
No changes. Weather was 75° really wanna get that 12.99 pass than ill start making BIG changes. Anyone think its possible the way it is to get that 12.99 pass?

Foxtbirdcougarforums Top 25 ET List!

Reply #332 –
Went to the track earlier again new pb:13.17@103

Foxtbirdcougarforums Top 25 ET List!

Reply #333 –
well just got around to posting about going to the fun ford weekend at pbir, I made it to the semi finals took 3rd place and got knocked out by a 2011 5.0 with a f1 blower that ran 9.50's (ouch) and it was heads up racing. This was the first time I ever raced other then test and tune, it was tons of fun. I was running drag radials and it was wicked hot so the best time I could turn was 11.6@117 a few times the smaller tires lowered my mph but I can say the drag radials brought the wheel up off the ground(got it on tape)
these are two inside the car runs sorry for the profanity in the second one I thought with the wheel spin off the line that car beat me but that was the 9.50 car, I was caught up in the moment.lol

1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Foxtbirdcougarforums Top 25 ET List!

Reply #334 –
saw this at the ford show
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Foxtbirdcougarforums Top 25 ET List!

Reply #335 –
Quote from: slowbird;398813
Went to the track earlier again new pb:13.17@103
You are getting very close. Is there any weight you can remove?

turbo charged 94 Cobra engine/440cc injectors/megasquirt /5 speed swapped (T5)/maxbox upper intake/70mm PP throttle body/AJE coilovers/2003 Mustang control arms/S.T. sway bars/ES rear control arm bushings/11" brake conversion/manual rack conversion/8.8 TC rear with rear discs and a welded diff/3.73 gears/PLX wideband/199mph speedometer/Aeromotive FPR/CNC hydraulic hand brake/cobra R wheels/....ect.

Foxtbirdcougarforums Top 25 ET List!

Reply #336 –
Not really there like the a/c stuff but its a street car so I don't wanna cut or remove anything car to clean/solid to do that ..

Foxtbirdcougarforums Top 25 ET List!

Reply #337 –
Here a break down of the run.
Rt: .112
60ft:1.873
330: 5.437
1/8th: 8.400
Mph:83.05
1000ft: 10.982
1/4: 13.177@103.15

I know for a fact if I stayed later I would've got that 12 second pass guess ill just try again next friday

Foxtbirdcougarforums Top 25 ET List!

Reply #339 –
Run 5w20 that will give u a little more rev, and make sure your timing us like 32-34*, and diet for 1 week
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Foxtbirdcougarforums Top 25 ET List!

Reply #340 –
I run 5w20 timing not sure ill have to check it. Diet never was good at that lol.  Just really surprised how well it been running on motor wit a nitrous convertor. I would've never thought I would have this much fun going this slow lmao. I always seem to get a good laugh when people point or come up to me n say really why would u run this? They always come back after a run n say I surprised the hell out of them...

Foxtbirdcougarforums Top 25 ET List!

Reply #341 –
Bad day at the track,  started the day off over heating, plugs fouled, rpms wouldn't come up . Had to abort 5 of my 7 runs. Fuel tank has a bad leak according to track officials n something broke in rear I think, right tire is rubbing bad n clanking. :( just my luck. Best pass was 13.37@100

Foxtbirdcougarforums Top 25 ET List!

Reply #342 –
Nothing new guys? I only got a PB 60FT 1.84

Foxtbirdcougarforums Top 25 ET List!

Reply #343 –
Not gonna be anything new from me till spring. I got my new tranny in, but now the track is closed for the season :(

turbo charged 94 Cobra engine/440cc injectors/megasquirt /5 speed swapped (T5)/maxbox upper intake/70mm PP throttle body/AJE coilovers/2003 Mustang control arms/S.T. sway bars/ES rear control arm bushings/11" brake conversion/manual rack conversion/8.8 TC rear with rear discs and a welded diff/3.73 gears/PLX wideband/199mph speedometer/Aeromotive FPR/CNC hydraulic hand brake/cobra R wheels/....ect.
 

Foxtbirdcougarforums Top 25 ET List!

Reply #344 –
here is a pic of my 1st time slip getting in to the 10's with a 100 shot hitting it about 40' out(out side temp was in the upper 80's) i drove it 35 miles to the track and then stopped for icecream on the way home lol
  it's got a 347 mounted to a C4 with 4.10 gears in the rear and