Blow thru carb turbo Been throwing the idea around of converting to carb and doing a blow thru turbo setup on it. This may be the wrong forum to...
1 Replies
June 06, 2017, 12:05:59 AM rotorr22
4 Replies
June 05, 2017, 11:50:17 AM Cornfed85
9 Replies
June 04, 2017, 03:34:30 PM
Which fuel tank ? My 85 project did not come with a fuel tank. I'd rather use a stock tank. Since the 85 was an EFI motor and I am putting a...
2 Replies
May 30, 2017, 01:55:55 PM jcassity
84 Tbird 3.8, 5.0 swap Hello all. I am thinking of swapping in a nice 302 and manual tranny. Where do I start? I need an 8.8 rear axle correct? ...
12 Replies
May 26, 2017, 08:32:07 PM Aerocoupe
EGR valve clean or replace I tuned up my 86 Cougar 3.8L V-6 engine, it was lunging a bit at stops, I replaced the TPS, plugs, wires, rotor, dis cap,...
3 Replies
May 21, 2017, 09:20:27 AM jcassity
84 3.8L Low on Power I have an 84 Tbird with 3.8L that has weak acceleration. I replaced the ignition module some time ago after it began...
53 Replies
May 19, 2017, 08:38:34 PM atengnr
Motor mounts? I have a late 70's carbed 302 truck motor I want to put in a 1985 TBird. Can someone give me the part numbers for the motor...
1 Replies
May 13, 2017, 09:53:14 AM Moonmount
Sending unit swap? On my 83 Im having some fuel system issues and I want to get rid of the low pressure in tank pump. My tank is new and so is...
0 Replies
May 10, 2017, 01:05:00 AM deathbypsi
reset eec-iv after the battery has bin off for more than 30mins can you tell me the correct way to do this as always just let it idle for...
1 Replies
May 03, 2017, 01:02:36 AM Haystack
6 Replies
April 26, 2017, 02:41:18 PM thunderjet302
1 Replies
April 21, 2017, 07:27:55 AM Skunk
Engine kit Anyone have any experience with this engine kit? Is it worth it?
...
7 Replies
April 13, 2017, 01:11:41 PM tommym
SEFI conversion to MAS I am looking for information on this conversion -- i have a 1987 cougar orignal 5.0 fuel injected , installed new "HO"...
57 Replies
April 13, 2017, 06:54:31 AM
7 Replies
April 11, 2017, 07:27:46 PM Haystack
Dual exhaust on SO I'm thinking of installing headers,H-pipe & duals as I gather parts for ho conversion . Any tips or advice? Its on my 87...
9 Replies
April 11, 2017, 07:24:02 PM Haystack
1988 Turbo Coupe Boost Problems Greetings,
This is my first post and I thought this would be a great place to do it. I have a 1988 Turbo Coupe with the 5...
20 Replies
April 08, 2017, 08:31:44 AM turbo coupe guy
1 Replies
April 07, 2017, 07:48:07 PM softtouch
9 Replies
April 01, 2017, 01:45:11 PM BornInAFord
Rocker arm size? I had a TFS1 spring kit installed on my gt40 heads while they were at the machine shop. I will be running a stock ho cam and...
5 Replies
March 26, 2017, 11:48:48 AM jcassity
