I Know Kinda Off The Topics A Lil But I Have A 2.5 Inch Cowl Hood That Follows The Lines On My Bird I Mad It Awhile Back I Will Post Pics Up If Any One Wats To See Just To Get An Idea Of What It Would Look Like Cause I Think That It Would Be Bad Ass If We Could Get Some Glassed Ones Made
Well Anythng Is Possible And If I Am Not Mistaken Thats The Way The Mustangs Had The Tank In The 60's The Only Way I See It Practical If You Cut Of All The Lines And Put A Sump On The Bottem So It Would Sit Preety Flush In The Trunk So That You Can Still Use Your Trunk To Put Junk With Out It Moving Around And Busting A Line That Just My 2 Pennys
intersting suggestion the vodaka thing well i am 18 so i might bot be able to try that;) and i do feel stressed out i feel real tense even when i am lying down i feel my upper body real stiff it just wont relax i am going to try thw no sleep thing i didnt sleep at all last night i am still up and i am going to work today and try and get good and tired and hope to fall asleep thanks every one
ok every one i got my distributor put in and installed it works a hell of a lot better then that dura it had it runs really strong above 3000 but under that there is no power what so ever
so i need some help with two things
1.my starter stays stuck after the engine starts any what causes that how do i fix it
2.what the hell do i a have to do to get some low end power the only thing i can think of is switch intakes i use a torker2 right now help!!!
well it is 5:34 in the morning and i cant sleep at all i have had this problem for a awhile already and it is drivng me crazy i dont know what to do i have taken sleeping pills with no success and i dont wanna keep taking them cause most of them are narcatic so i am here just trying to vent the fustration of not being ablt to sleep any one else have trouble sleeping any one got any suggestions i am willing to try any thing
well when i take my stuff to the machine shop they hot tanked my block for 20 bucks i am sure heads shouldnt cost more but the machine shop could clean them up for you
i dont know if you are still looking suggestions but if you are going to sand blast them or media blast them they make a compund that is like crushed up peanuts and other stuff that is suposed to be pretty gental and any time you are going to paint bare aluminum you are going to want to use self etching primer and if you plan on leaving the lip or any part of the wheel bare i would suggest polishing it real shiny like then using some brake cleaning to clean it up real good (not oil based and dosnt leave a residue) then put an adhesion promoter then spray some clear and wala always shiney aluminum with very little maitnece
i know i lot of stuff but but that will insure that it looks good and last a long time
actully i dont know why and it looks real gay the only thing i did to it was take the sway bar off i think i might cut the springs it had v6 spring way back when and when i put the v8 it slamed it down so i put in v8 springs and its been like that well it looks higher then it used to but i dont know
my car is back it is finally in a good enough shape to pose for a picture so here it is for all to see i am proud of it its finally all the same color and all there minus the hood and you all are going to flip when you see my hood (custom scoop) i had to make another one cause the last one got busted in the crash i should be putting primer on it today well i got more pics if you all want em
What You Mean I Use The Mouse With My Right Hand I Use My Left Hand On The Arrows And My Right Hand On The Mouse The Mouse Is On The Right Side Of The Key Bored And When I Use The Lap Top I Cross My Right Over My Left And Do It That Way
does any one here play nitto 1320 challange its a online drag racing games its all right helps pass the time you can download it at http://www.nitto1320.com if you do play or decide to play let me know screemin306@aol.com
well i will just have to see what deals come up but for now i got some good news i have figured the main bugs out in the t bird i thought it was carb problems the hole time turns out it wasnt it was the dam duraspark box that was jacking everything around so i got a hole new ignition setup on its way i will let you guys know how it go's when i put it in
the bay is gravatexed its like a light bed liner and i think i am going to leave it black and the rims are egale alloys the five spoke ones 15x8 and i wanted to weld the holes p but i never got a hold of a mig so they will have to stay like that for a while thanks for the compliments