Son of a biscuit! These subframe connectors are kicking my ass July 26, 2006, 10:32:49 PM So 2 days ago I started on my subframe connector install, got the seat braces welded to the connectors and the reinforcing tabs welded on, and my welder ran out of wire. So I picked up a new 1 lb spool before I left work yesterday. Today I started putting the connectors in, got all the welds done except the inside two on the back (on the subframe side facing the lers) and the welder ran out of wire AGAIN:toilet: So, I guess my question is, will this thing be OK without those last two welds for a couple days? I won't be able to get at it again until Sunday most likely. I hope it'll be OK as I don't have any choice except to drive the car as is Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #1 – July 26, 2006, 10:39:26 PM Should be fine. Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #2 – July 26, 2006, 11:52:25 PM Second that Should be fine remember the car got by w/out them for ever you know better then me there your welds as long as there strong enough to stay there and you don’t do any road course racing so that the car flexes to the stress point to break them. Even still you should be fine with good welds on have them. Quote Selected
Subframe Connectors Reply #3 – August 13, 2006, 04:09:54 PM Whats up man! I was just trying to figure out where to get subframe connectors for a tbird!! I dont know if mustang connectors would work or not!! All and any help would be appreciated!! Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #4 – August 13, 2006, 04:12:09 PM Whats up man!! Just wondering where you got connectors for a tbird.......all i see them for is a mustang.....they may work.....im not sure!! All and any help would be appreciated!! Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #5 – August 13, 2006, 06:55:22 PM http://www.40bob.comThey're on there. Or you could make your own, the Thunderbird's connectors are just straight 1"x2" rectangle tubing with endcaps welded on. Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #6 – August 13, 2006, 10:58:26 PM Hey man....thanks alot!! Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #7 – August 15, 2006, 07:42:31 PM Quote from: Red_LXhttp://www.40bob.comThey're on there. Or you could make your own, the Thunderbird's connectors are just straight 1"x2" rectangle tubing with endcaps welded on.That'll work if you're doing through the floor connectors...see the angles on Bob's SFC's? You kinda need them if you don't want to hack/beat the out of your floor pans. Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #8 – August 15, 2006, 09:28:19 PM Huh?Mine were just straight stock and they welded in just fine...didn't hit anything. The ones in the pics with the "angles" are the ones for the Mustangs. Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #9 – August 15, 2006, 10:54:21 PM The SFC's I did for the Tbirds were straight and have always been straight. The offsets were not needed. Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #10 – August 16, 2006, 12:41:23 AM The KB sfc's I have are straight as well... Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #11 – August 16, 2006, 12:52:00 AM I'm straight too. Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #12 – August 16, 2006, 04:10:28 AM Quote from: tbirdscottI'm straight too. are ya sure? kiddin' man :D Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #13 – August 17, 2006, 08:44:17 PM Wow, if straight SFC's are working for everybody, then I must have a serious problem. Disregard previous post. Quote Selected
Son of a biscuit! These subframe connectors are kicking my ass Reply #14 – August 17, 2006, 09:22:15 PM yeah don, if u come out ever again :p we can compair SFC's Quote Selected
Topic: Son of a biscuit! These subframe connectors are kicking my ass (Read 2081 times)
previous topic - next topic
