My GTbird build
Reply #91 –
The exhaust is 1 3/4 long tubes with 2.5" collectors,the Y-pipe is all 2.5" then it steps up to a Stinger Performance 3" stainless TC ler back. I went with the single to keep it simple and sleeper status. I also didnt want to get into moving the fuel pump,filter and fuel lines on the passenger side along with changing the routing of the rear brake hose since these 2.3t cars only had a single system running down the drivers side.
I got all the rear control arms rebuilt with Energy Suspension bushings and I cut some plates to box them. 8.8 got all cleaned and stripped today along with all new seals.The posi and 3.55s looked great still so they will remain untouched for now.