Skip to main content ↑ ↓
Topic: Blown turbo (Read 670 times) previous topic - next topic

Blown turbo

I have a Garrett Airesearch T3 turbo with .63 exhaust. It doesnt have shaft play at all but it is leaking oil out of the exhaust side. What rebuild kit should i buy for the turbo?
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

Blown turbo

Reply #2 –
it says M11 in the compressor side and M4 .63 on the exhaust side. Is that what i need?
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

Blown turbo

Reply #3 –
There should be a tag on the compressor backing plate. Use the numbers off that to order a kit from a reliable vendor, such as g-pop shop, or turbocity.
88 TC 5speed, 168000+ miles, stock 2.3T long block, ported RFE6 exhaust, Evergreen T3 running 15#'s.
Up next: FMIC, fresh air intake, ported intakes, ported big valve head.