Dream engine build? Reply #15 – July 13, 2011, 05:42:22 PM Quote from: 347Thunder;363371I would take a twin turbo, 5.0L coyote That would get my attention. Quote Selected
Dream engine build? Reply #16 – July 13, 2011, 07:24:42 PM Quote from: 347Thunder;363371I would take a twin turbo, 5.0L coyoteQuote from: 86T-bird;363377That would get my attention. If anything other than a lima were to ever reside under the hood of my car, the coyote is on the short list. I'd probly stick to a single snail however.Currently my dream engine consists of one with 4 intact connecting rods.... Quote Selected
Dream engine build? Reply #17 – July 14, 2011, 01:11:03 PM 4.6 or 5.4 with blower, I think the thing I would like most is a "clean motor" all the wiring, vacuum lines hidden. Something I could drive everyday and still abuse. Quote Selected
Dream engine build? Reply #18 – July 14, 2011, 06:49:25 PM My dream engine in a Fox car? You'll all think I'm retarded, but I'd love to drop a Duramax into a Mark VII. Money being no object it'd be built to the nuts (at least as far as it could be built without affecting durability too much). The rest of the car would be built up so that I could use it to reliably and safely haul a decent sized (24-foot-ish) camper trailer on a North American tour. I remember reading about a fairly stock Duramax engine powering a fox Mustang into the 10's and still getting ~35 MPG. Of course that's a non-Ford engine.My dream Ford-into-Fox build would probably be something not too retarded, like an Ecoboost cranked up to ~400 horses... Quote Selected
Dream engine build? Reply #19 – July 14, 2011, 10:50:53 PM Infinitely slow, but I'm working on my dream motor:Should be done by 2025. Quote Selected
Dream engine build? Reply #20 – July 15, 2011, 09:38:16 AM Start off with Ford Aluminum Big Block going for 800 inch's of joy, John Kaase P heads, 2 T6 turbos and shove it in a pinto wagon Quote Selected
Dream engine build? Reply #21 – July 15, 2011, 11:11:40 AM Quote from: Thunder Chicken;363449My dream engine in a Fox car? You'll all think I'm retarded, but I'd love to drop a Duramax into a Mark VII. Money being no object it'd be built to the nuts (at least as far as it could be built without affecting durability too much). The rest of the car would be built up so that I could use it to reliably and safely haul a decent sized (24-foot-ish) camper trailer on a North American tour. I remember reading about a fairly stock Duramax engine powering a fox Mustang into the 10's and still getting ~35 MPG. Of course that's a non-Ford engine.My dream Ford-into-Fox build would probably be something not too retarded, like an Ecoboost cranked up to ~400 horses...can i borrow your dream????? Quote Selected
Dream engine build? Reply #22 – July 15, 2011, 12:36:39 PM Quote from: SirChirpAlot;363490Start off with Ford Aluminum Big Block going for 800 inch's of joy, John Kaase P heads, 2 T6 turbos and shove it in a pinto wagon Hey, I had 2 of them. they had 69' 429s w/c6s. first one wasn't tubed but the second one was. custom fenderwell headers. Very fun to drive and to keep going in a straight line at the track. Quote Selected
Dream engine build? Reply #23 – July 15, 2011, 06:23:22 PM Quote from: HAVI;363472Infinitely slow, but I'm working on my dream motor:Should be done by 2025.Oh yeah!!!Id love to have a 351C too. Trick Flow makes a EFI intake for them now and Hooker makes swap headers too. I think my dream engine just changed. Quote Selected
Dream engine build? Reply #24 – July 15, 2011, 09:36:44 PM Here is the build I am actually going to do, but it's also me dream build. :)Boport Pistons $549.00 or Stinger CP Pistons $580http://www.bo-port.com/index.php?act...d&productId=26http://www.stinger-performance.com/suspensionparts.htmlBoport Head $1250.00 or Aluminum Borport Head $2950.00http://www.bo-port.com/index.php?act...d&productId=72http://www.bo-port.com/index.php?act...d&productId=58Boport Stage 3 Ported Upper/Lower Intake Manifolds $425.00http://www.bo-port.com/index.php?act...d&productId=13Garrett GT35R Ball Bearing Turbo (600HP) $1342.95http://www.frsport.com/Garrett-GT358...e_p_16163.htmlStinger PIMP ECU w/Tuner Studio $670.00http://www.stinger-performance.com/universalparts.html1000cc Injectors (640-700HP) $230.00http://www.stinger-performance.com/universalparts.html38mm External Wastegate $170.00http://www.stinger-performance.com/universalparts.html2.3 to SBF Bellhousing Adapter Plate $175.00Aluminum Flywheel $335.00http://www.stinger-performance.com/suspensionparts.htmlStage 3+ Clutch $435.00http://www.stinger-performance.com/suspensionparts.htmlShort Throw Shifter $75.00http://www.stinger-performance.com/suspensionparts.htmlBrembo Big Brake Kit $1500.00Bullet Proof Edition T5 Transmission (600+HP) $1790.00http://www.promotionpowertrain.com/TRANSMISSIONS.html4.10 Moser Gears $190.00http://www.allfordmustangs.com/forum...sb-list-3.htmlSnow Performance Stage 3 Water Methanol Injection $500.00http://www.snowperformance.netSummit Fuel Cell $104.95http://www.summitracing.com/parts/SUM-290106/Roll Cage $1500.00Frozen Boost Water to Air Intercooler Kit (600HP) $299.99http://www.frozenboost.com/product_i...764096411a5ea3Full 3 Inch Custom Exhaust (header/downpipe/out) $1000.00__________________________________________________ __________________________________________________ ____________Total Cost $14241.89 Quote Selected
Dream engine build? Reply #25 – July 15, 2011, 11:19:36 PM Quote from: HAVI;363472Infinitely slow, but I'm working on my dream motor:Should be done by 2025.I know the feeling LOL Quote Selected
Topic: Dream engine build? (Read 2771 times)
previous topic - next topic
