Skip to main content
Topic: Chrome door handles (Read 2883 times) previous topic - next topic

Chrome door handles

Reply #1
Here is a pic. I believe this is the one for our cars.

Chrome door handles

Reply #2
I don;'t think that would fit ours.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Chrome door handles

Reply #3
I know I don't think so either but its just a pic if u click on the link and scroll down you will see they have them in Chrome and factory black.

Chrome door handles

Reply #4
If you really want chrome door handles head to the parts store. They make them in the HELP/ motormite brand.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Chrome door handles

Reply #5
I went to there website they don't make them in Chrome, nor did I see them in the black. If u find them let me know.

Chrome door handles

Reply #6
The outer door handles were also used on earlier Fox Mustangs. If you see listings for 'chrome' and 'black'...that's what you'll be getting: reproduction Mustang handles, usually not made in the U.S. Not sure of the quality. Probably good enough for daily drivers, maybe not so much for show quality cars.

CJ Pony Parts is good for the repros (here)...and sometimes they have OEM handles (here and here).

Or you could do as ipsd suggested and try the Help! handles if all you would need is chrome. Again, not sure of the quality.

Chrome door handles

Reply #7
Here you go! I guess cause I work for a parts store I'm the only one that can find them http://www.oreillyauto.com/EW3/ProductDetail.do?id=2037347140&line=MTM&itemNumber=77062&categoryIndex=0&didSearchFor=Door+Handle&vehicle=1988MERCURYCOUGARLSV6-232%20%203.8L&bid=1220398035096&cycleCount=708¤tPage=0
The part number is 77062 driver side and 77063 passenger side  now next time get up and look!
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Chrome door handles

Reply #8
Don't the vast majority of these cars already have chrome door handles? I know my 88 does, and I thought all except the Turbo Coupe, Sport and XR7 had 'em. I briefly considered swapping the black handles out of my spare TC doors onto my car to complete the de-chroming but decided against it. Not for any noble reason, mind you - I was just too lazy to drill the rivets out of the TC handles (the chrome ones were already off for the paint job)
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

Chrome door handles

Reply #9
Thanks I found them sorry. I going to get them.

Chrome door handles

Reply #10
most of my Cougars and thunderbird had them...  except the aero years....

Chrome door handles

Reply #11
Well mine has black, so I want to change them.

Chrome door handles

Reply #12
THe chrome on mine are cooked.
I'm keeping the black TC handles for the time being
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

 

Chrome door handles

Reply #13
Quote
I was just too lazy to drill the rivets out of the TC handles

Aw come on, Carm...with that year-round snow that y'all have in Canada, all you need is a hammer and a punch, and them frozen rivets will pop right out. ;)

Little tip: if you don't want to use pop rivets upon reinstallation, you can use 1-1/4" carriage bolts with some Loc-Tite. They're a little more secure as they're harder to drill out, won't let the handle flop around over time, and can be completely removable (with some elbow grease) when you want them to be. Plus they look cooler.

Chrome door handles

Reply #14
black handles FTMFW!
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~