Skip to main content ↑ ↓
Topic: Project Evolution *** Project Complete **** Wednesday July 9, 2014 (Read 1154121 times) previous topic - next topic

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3165 –
did you use the exploder pump on yours?
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3166 –
Me? No. I used an Autozone unit. Tranny fluid and Lucas. No issues at all.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3167 –
Quote from: Thunder Chicken;372129
Oh come on, an 80's Ford without PS whine isn't really an 80's Ford...

What whine? Maybe I just don't hear it because I'm used to it....
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3168 –
This thread should turn into the lounge.

All joking aside, I would really like to see all of damiac's pictures and posts archived in their own thread.
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3169 –
Quote from: thunderjet302;372200
What whine? Maybe I just don't hear it because I'm used to it....

LOL... It's really noticeable when you don't hear it for 2 years
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3170 –
Quote from: Haystack;372202
All joking aside, I would really like to see all of damiac's pictures and posts archived in their own thread.

I believe there's a way, and software to do that... I was going to try that after I got the car to move  out of the garage on it's own power. I think then, the project will officially come to and end. I was thinking about posting a copy on Daminski.com also. this way if photobucket ever messes up my pics...I'll have another copy on the site and also burned to disk.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3171 –
BTW....
[SIZE="5"]Looking for a TV cable for my aod[/SIZE]... The 3.8 was diff, and the bird had a C6 in it.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3172 –
http://www.ebay.com/itm/1990-1993-MUSTANG-5-0-TV-TRANS-CABLE-/370551023127?hash=item56468fe617&item=370551023127&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3173 –
You could use lokar set up if you can't find one.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3174 –
Quote from: daminc;372213
BTW....
[SIZE="5"]Looking for a TV cable for my aod[/SIZE]... The 3.8 was diff, and the bird had a C6 in it.

I think I might have one i'll take a look
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3175 –
Quote from: 347Thunder;372485
I think I might have one i'll take a look

let me know if you have one
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3176 –
I found two, one is from a mustang floor shifter and the other was from my car. The boot is ripped on the one from my car but it works fine($40 shipped your choice!!), if you don't want these I can get you one from the junk yard if its still there.
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3177 –
Quote from: 347Thunder;372531
I found two, one is from a mustang floor shifter and the other was from my car. The boot is ripped on the one from my car but it works fine($40 shipped your choice!!), if you don't want these I can get you one from the junk yard if its still there.

PM sent..
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3178 –
Hey Jerry hook a rope to it. I know you can make it work.lol
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #3179 –
I got a box from you today. I'll ship it back asap for you.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..