5.0 Mass Air conversion on 2.3 turbo? July 20, 2007, 04:32:16 PM I bought this plug for my 5.0 mass air meter for my turbo 2.3 but I'm not sure which wires on the plug go to which wires on the factory wiring. Can anyone help? Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #1 – July 20, 2007, 05:50:28 PM What other bits do you have? You're not just going to plug that in in place of the VAM and have it work. Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #2 – July 21, 2007, 09:26:11 AM What else do I need? Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #3 – July 21, 2007, 09:32:44 AM I also have everything I need to upgrade to a 5.0 throttle body but need to have my intake port matched and I’ve got 46lb injectors, a new fuel rail (OEM), and an adjustable fuel pressure regulator. But I want to put all that on together and like I said I need to port match my intake manifold. Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #4 – July 21, 2007, 12:45:26 PM Quote from: JoeNoble;162379What else do I need?Some way to convert the signal from the MAF into something the turbo ECU can even use. They are not the same. Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #5 – July 21, 2007, 01:11:12 PM If you look at the wiring diagram for a car with a MAF and a car with a VAM they are totally different. Its not as simple as changing the connector. A MAF is treated as a stand alone sensor, a VAM shares wires with other sensors. Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #6 – July 21, 2007, 01:37:13 PM Quote from: Chuck W;162410Some way to convert the signal from the MAF into something the turbo ECU can even use. They are not the same.So basicaly I need to what? Upgrade my ECU? Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #7 – July 21, 2007, 01:53:57 PM You need to research. The info is all over TurboFord.org Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #8 – July 21, 2007, 02:07:50 PM Quote from: Tbird232ci;162424You need to research. The info is all over TurboFord.orgHas noone on this forum done a 5.0 mass air conversion on a 2.3 turbo? Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #9 – July 21, 2007, 02:30:05 PM Quote from: JoeNoble;162425Has noone on this forum done a 5.0 mass air conversion on a 2.3 turbo?I did one, but I included the 5.0 as well... :D AFIK no one here has done such a mod... Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #10 – July 21, 2007, 02:34:16 PM Quote from: TurboCoupe50;162429I did one, but I included the 5.0 as well... :D AFIK no one here has done such a mod...AFIK? Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #11 – July 21, 2007, 03:06:41 PM As Far as I Know. Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #12 – July 21, 2007, 08:46:59 PM Quote from: JoeNoble;162425Has noone on this forum done a 5.0 mass air conversion on a 2.3 turbo?you will need a moates j3 adapter and someone to burn you a chip with the maf tables. Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #13 – July 22, 2007, 04:11:24 AM That sounds nice and expensive. Thanks bro.Are there any mods for the ford 2.3 that don't require ecu modification? Quote Selected
5.0 Mass Air conversion on 2.3 turbo? Reply #14 – July 27, 2007, 10:16:05 AM I was told as long as the mass air meter came off another turbo engine that it'll work but my question is were there any turbo fords that came with a flow through maf similar to the 5.0 maf? I found a few on ebay that say they're probe or merker turbo mass air's but can't tell from the pics if they're flow through’s. Quote Selected
Topic: 5.0 Mass Air conversion on 2.3 turbo? (Read 3829 times)
previous topic - next topic
