Skip to main content
Topic: remote replacement (Read 970 times) previous topic - next topic

remote replacement

I'am down to 1 remote and the case is cracked .The number on the back is goh m24 does anybody where to get a replacement?It's for 97 :cougarsmily: with a v6

remote replacement

Reply #1
Your local ford dealer They can program it also
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

remote replacement

Reply #2
Check ebay or do a google search for key fobs or something similar. I did this after we purchased our explorer because we did get any remotes with it. There is a place (do remember the name) that sells the geuine Ford remotes.
Our web page


02 Explorer XLT 4.0L
04 F150 FX4 Supercrew 5.4L
02 Saturn SL1 1.9L
09 Vstar 950 Tourer

remote replacement

Reply #3
Ive got a couple new ones I bought and never used, I will check and see if they are the same.  You can program them yourself.

remote replacement

Reply #4
Thanks all.I found a place online 50 bucks .

remote replacement

Reply #5
Sam I sent you a pm

 

remote replacement

Reply #6
I need some input.I brought 2 new remotes and they gave me detailed instructions.
I can't get the to alarm cycle to program the new remotes.There a led light on the dash it says hold the light for 20 seconds to start the process any ideas?

remote replacement

Reply #7
I can't speak about keyfobs but I've programmed enough home remotes to realize that although the self program functions might be easier or more accurate, I  question accurate, but doing it manually is by far faster! It might take a little practice to get the process down. Push button 15 sec look closely remote blinks then go to next instruction step. Mess up, remove battery, start over. It's a process.