Heater Hose Replacement

Topic: Heater Hose Replacement (Read 1332 times) previous topic - next topic

Heater Hose Replacement

November 01, 2006, 07:44:09 AM

I need to replace the molded heater hoses (both coming from the core) on my 88 5.0. My shop manual shows one having the temperature control unit inline - but mine is on the manifold. I'm having trouble getting the right part #'s. Most are 5/8" 90 degrees or cut to fit but these replacements need to bend 4 or 5 different ways. I can get the Ford # off of one of the hoses (same # as in the shop manual) but not the other.

Does anyone have a good resource to get the right part the first time?

Heater Hose Replacement

Reply #1 – November 01, 2006, 09:15:16 AM

Take the hoses off and take them to the parts store with you. Also if you can't find the right ones makes some. With stright hose and some of those gates uni fit coils. They are rings that go over the hose so you can bend it and it won't colapse. you can make 90* bends or more or less with these. Most parts stores should be able to get you the right hoses.

Heater Hose Replacement

Reply #2 – November 01, 2006, 09:20:15 AM

just replaced mine a few weeks back, these are the part #'s i used (Advance)
#S63087-9.99
#S63726-6.99
I think one is 5/8, and the other is 3/4, just had to cut to length

Heater Hose Replacement

Reply #3 – November 01, 2006, 09:41:38 AM

Here's a snip from my research last year...

(I used the Ford 3/4" (E7SZ) and Motorcraft 5/8" (KH-195) cause that's what the dealer had listed).

Supply (pipe2) to heater core
- 4 turns
- 3/4" x 11.6"
Ford............ E7SZ-18472-A (inc. restrictor)
Motorcraft...... KHM-121 (discontinued) KY-2 (flex 3/4)
ACDelco......... 14176S
Dayco........... 80411 * 2 + 80423 (90deg connector)
Gates........... 19606 - Heater To Pipe-2, W/O ATC CtF {Molded}
Goodyear........ 63087/63037
NAPA............ NBH11606 ctf
Drive-rite......

Heater core to return (pipe1)
- 3 turns
- 5/8" * 12.5
Ford............ E6LY-18472-C
Motorcraft...... KH-195 / KY-1 (flex 5/8)
ACDelco......... 16030M
Dayco........... 80400 * 2 + 80422 (90deg connector)
Gates........... 18705 - Heater To Pipe-1, CtF {Molded} (DAYCO xref = 87621)
Goodyear........ 63138
NAPA............ NBH10705 CtF
Drive-rite......

Heater Hose Replacement

Reply #4 – November 01, 2006, 10:07:04 AM

Thanks, y'all. That's what I needed. I would normally have taken them off but anything I ask for will have to be ordered - sight unseen. These part #s will get it done.