Gasket or NO Gasket..... that is the question... June 15, 2011, 09:25:04 AM Are you guys using header gaskets when installing a set of the Stock mustang headers to stock iron heads?http://www.latemodelrestoration.com/item/M9448B302/79-95-Mustang-Ford-Racing-302-351-Header-Gaskets Quote Selected
Gasket or NO Gasket..... that is the question... Reply #1 – June 15, 2011, 12:04:56 PM I use Explorer gaskets on my gt40 irons. Like them fine, no leaks, cheap, and easy to find in stock. Unless you surface grind the header a tad to really make sure you have a perfect surface(and youd probably have an imperfect head surface), youll end up using a little silicone, which is in effect, a gasket. Quote Selected
Gasket or NO Gasket..... that is the question... Reply #2 – June 15, 2011, 03:07:29 PM Will the high temp silicone hold up? Quote Selected
Gasket or NO Gasket..... that is the question... Reply #3 – June 15, 2011, 03:18:24 PM Yes, I always use gaskets to get the best fit. Last time I used Felpro. Quote Selected
Gasket or NO Gasket..... that is the question... Reply #4 – June 15, 2011, 03:32:13 PM Gaskets, yes. Quote Selected
Gasket or NO Gasket..... that is the question... Reply #5 – June 15, 2011, 04:50:30 PM I always use gaskets. Percy''s. Quote Selected
Gasket or NO Gasket..... that is the question... Reply #6 – June 15, 2011, 08:37:15 PM MR gasket makes a good one for the 302, I use it on my 5.0 header equipped cars Quote Selected
Gasket or NO Gasket..... that is the question... Reply #7 – June 16, 2011, 07:34:18 PM Hi temp RTV silicon only here.Place a bead of silicon on the header 'Assemble and tighten the bolts FINGER TIGHT ONLY!Let sit for 24hrs (or longer)THEN torque to spec. Quote Selected
Topic: Gasket or NO Gasket..... that is the question... (Read 1069 times)
previous topic - next topic
