Skip to main content
Topic: 1987 T-bird 3.8 V6 CFI engine specs... (Read 2371 times) previous topic - next topic

1987 T-bird 3.8 V6 CFI engine specs...

Hello!
I can't find '87 3.8 V6 CFI engine data over the net so I thought you may have them. I'm looking mosty for power and torque data.
Thanks in advance for help!
Mariusz...

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #1
Simple, just check out one of the linked sites in the main banner.  Here's all the info you need:

http://www.foxthundercats.com/vitalspecifix.htm
1987 Thunderbird 3.8. Sold :(

1982 Thunderbird - Goodbye 255, Hello 302!

 

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #2
Thank you!

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #3
theyre dissapointing numbers...
It's Gumby's fault.

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #4
what would it be if i decated it and put 2 1/2 inch dualies on my 87 3.8? :D

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #5
not much higher, 2 1/2 is going to make you lose some torque
It's Gumby's fault.

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #6
I needed that data for a guy who is writing an article about my T-bird.
Speaking of exhaust, do you know a safe way to get rid of those two small cats going right after the manifolds? Think it's not a good idea to unbolt the pipes from manifolds. They are pretty rusted after 18 years and I don't want to mess something up!

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #7
Take it to an exhaust shop and see if they can get them off. Even if they break you could have them put new studs in the mainifold.

Quote
I needed that data for a guy who is writing an article about my T-bird.

Don't forget to have the guy mention this site in the article.

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #8
Quote from: slamedcat
Even if they break you could have them put new studs in the mainifold.

With the manifold still on the engine?

Re: 1987 T-bird 3.8 V6 CFI engine specs...

Reply #9
Quote from: Shevretti
With the manifold still on the engine?


yup they did it on my 88