I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Topic: I may look into making some poly motor mounts for the 86-88 3.8/5.0's.... (Read 13982 times) previous topic - next topic

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #135 – January 30, 2006, 10:57:29 AM

I was wondering chuck do those drop the motor at all?

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #136 – January 30, 2006, 12:25:51 PM

Quote from: CougarSE

I was wondering chuck do those drop the motor at all?

Nope...stock height.

It would be possible to drop them a bit, but I'm not going to get into clearance and driveline alignment issues on every person I sell these too either, so they will be offered as standard only. Custom stuff is always possible.

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #137 – February 15, 2006, 07:34:33 AM

I was wondering if you had any of the new batch up for sale yet, or what the latest word is, if I can get a set in time to go with my 5.0 conversion, I may just go this route, instead of with the Stang K member.
Price is still 125 plus shipping?

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #138 – February 15, 2006, 08:11:35 AM

The current batch in process is all spoken for. I did a run and it was low-key. Everyone contacted me directly. I'll be doing more, but not sure of the exact timeframe. If you want to send me an email (cwarren@indy.net) I can contact you when I have more available.

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #139 – February 25, 2006, 05:06:39 PM

Here's a couple pics of the completed mounts. I made sure I took pics before I got them all boxed up...:hick:

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #140 – February 25, 2006, 05:50:50 PM

chuck, those look sweet. it almost makes me wish i didnt do the k-member swap. if you get another batch together, put me in for a set for the cougar.

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #141 – February 25, 2006, 07:15:36 PM

Sweet!

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #142 – February 26, 2006, 12:02:34 PM

Very nice! I'm looking forward to gettin 'em on the car!

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #143 – March 03, 2006, 09:05:56 PM

Guess what? I got a package in the mail - it was heavy for such a small box :D

They look nice - can't wait for it to warm up so I can put them on :D

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #144 – March 03, 2006, 11:45:26 PM

Quote from: Cougar5.0

Guess what? I got a package in the mail - it was heavy for such a small box :D

Yeah, they have a little heft to them. Don't drop them on your toes

I'm thinking of changing up the material on the big top plates to take a little weight out.

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #145 – March 04, 2006, 04:07:07 PM

They don't weigh more than the stock units do they?

I only care if they handle the torque from my KB anyway :D

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #146 – March 04, 2006, 05:15:53 PM

I never weighed the stock ones.

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #147 – March 05, 2006, 06:14:03 PM

They feel about the same weight as the stockers.....

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #148 – July 14, 2006, 10:16:02 AM

Just to pop this back to the top.

Other developments have appeared to lead me to look into mounts for the 86-88 3.8's as well.

Primarily for the MN-12 SC's, the change of one piece will adapt them to the Fox cars. The converse should be true in regards to the 5.0 mounts working for the MN-12's with one part changed. It's an assembled part change and not something done during fabrication, so that will make things "easy".

I know the bulk of the 3.8N/A guys will have no desire for these, but they will be available.

I may look into making some poly motor mounts for the 86-88 3.8/5.0's....

Reply #149 – July 19, 2006, 09:18:13 AM

Quote from: Chuck W

Here's a couple pics of the completed mounts. I made sure I took pics before I got them all boxed up...:hick:

Wow. Those look really nice! When I finally break mine, I'll give you a call. Mine are Autozone specials from 5 years ago, or so. I've been surprised that they've held up as long as they have.

Maybe I should consider just ordering a set for WHEN I break mine? :) Send me a PM with price and availability, if you don't mind.

--Ed