Looking for parts and have a few questions.... July 29, 2016, 10:20:37 AM Most of y'all know I just picked up a nice 85 Turbo Coupe. I'm looking for a few replacement parts and performance parts.Also, the grey on the bottom is very chalky. Any suggestions as what to use to make it look nice again? The weather stripping at the bottom of the window, on the outside is cracked. Is that available anywhere?Looking for any performance parts. Intercoolers, boost controller, exhaust, etc. Let me know if you're selling. I would like to find a functioning auto dim sensor. It's the big radar detector looking thing in front of the rear view mirror. Thanks, Matt. Quote Selected
Looking for parts and have a few questions.... Reply #1 – July 29, 2016, 11:24:14 AM Please post specific "Want Ads" in the proper section of the forum. Quote Selected
Looking for parts and have a few questions.... Reply #2 – July 29, 2016, 11:26:50 AM Following this thread for answers. My '86 XR7 could really use outside window sweeps too :( Quote Selected
Looking for parts and have a few questions.... Reply #3 – July 29, 2016, 12:00:20 PM Quote from: CougarGal;456416Following this thread for answers. My '86 XR7 could really use outside window sweeps too :(Someone on CL posted this. Don't worry, it's not 134 conversion. It is weather stripping info.http://turbotbird.com/techinfo/83-86_Weather_Stripping_Replacement.htm Quote Selected
Looking for parts and have a few questions.... Reply #4 – July 29, 2016, 12:00:46 PM Quote from: CougarGal;456416Following this thread for answers. My '86 XR7 could really use outside window sweeps too :(Someone on CL posted this. Don't worry, it's not 134 conversion. It is weather stripping info.http://turbotbird.com/techinfo/83-86_Weather_Stripping_Replacement.htm Quote Selected
Looking for parts and have a few questions.... Reply #5 – July 29, 2016, 12:16:35 PM Quote from: cook96cbra;456418Someone on CL posted this. Don't worry, it's not 134 conversion. It is weather stripping info.http://turbotbird.com/techinfo/83-86_Weather_Stripping_Replacement.htmAWESOME!! THANKS!!! Sounds easy enough:Parts list:JC Whitney - 800-529-4486 http://www.jcwhitney.com 1983-86 dew wipes (outside, mounts to aluminum piece, cut to fit; remove factory staples, drill new holes and pop rivet on): KM819751 - $14.99 each - 2 required Quote Selected
Looking for parts and have a few questions.... Reply #6 – July 29, 2016, 12:37:26 PM No problem Quote Selected
Looking for parts and have a few questions.... Reply #7 – July 30, 2016, 10:53:06 PM Man, I wish we had a similar deal for the doors without vent windows! Quote Selected
Looking for parts and have a few questions.... Reply #8 – July 31, 2016, 02:41:18 AM SteeleRubber products offers new outside wipes, but, they are a little speedy. They are for 84 to 90 Lincoln mkvii but they are the same .Part # 80-6085-57$106.00 for a set of 2 with staples. Quote Selected
Looking for parts and have a few questions.... Reply #9 – July 31, 2016, 03:07:09 AM I'm trying to talk my dad I to making a custom 3d printer for these.We have been experimenting with a new type of 3d printing material called "ninja flex". It's basically rubber impregnated plastic. Quote Selected
Looking for parts and have a few questions.... Reply #10 – July 31, 2016, 08:39:23 AM Quote from: 1BadBird;456467SteeleRubber products offers new outside wipes, but, they are a little speedy. They are for 84 to 90 Lincoln mkvii but they are the same .Part # 80-6085-57$106.00 for a set of 2 with staples.Thank you Quote Selected
Topic: Looking for parts and have a few questions.... (Read 2865 times)
previous topic - next topic
