Skip to main content
Topic: Anyone Need Body Sections? 88 Turbo Coupe (Read 2188 times) previous topic - next topic

Anyone Need Body Sections? 88 Turbo Coupe

I need to get rid of this body but thought I'd see if anyone needs body parts. Car is rust free except trunk floor. I can cut and ship just let me know what you may need. I also have many other parts from the car. It was a 5spd car but no engine or trans. Thanks

Having trouble uploading pics but I can text if you'd like.
704-562-4433

Anyone Need Body Sections? 88 Turbo Coupe

Reply #1
XXX

Anyone Need Body Sections? 88 Turbo Coupe

Reply #2
Let me see...

I'm interested in both rear quarter panels, I only need the bottom part, from the trim down.  Could you make the cut line in the middle of the trim?  That would make bodywork a breeze.

Are other parts from the car for sale as well?
T-Birds can't fly.  Ask how I know...

Anyone Need Body Sections? 88 Turbo Coupe

Reply #3
I can cut them wherever you'd like. Do you need to whole bottoms behind the wheels with trunk drop off?

Yes I have a bunch of stuff off the car. What are you looking for? Interior was red.

Anyone Need Body Sections? 88 Turbo Coupe

Reply #4
I was going to say driver side fender but I think it's gone.....
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Anyone Need Body Sections? 88 Turbo Coupe

Reply #5
Quote from: thunderjet302;455314
I was going to say driver side fender but I think it's gone.....

Actually, I do have the drivers side fender. It has the hole for the cornering light.

Anyone Need Body Sections? 88 Turbo Coupe

Reply #6
I'm going to have to take a rain check (quite literally). We have been recovering from a flood in December and got hit again with 12 inches of rain in 4 hours this week. I haven't gotten all the painting done from last time....
T-Birds can't fly.  Ask how I know...

Anyone Need Body Sections? 88 Turbo Coupe

Reply #7
PM'ed
1988 Cougar LS - Cinnabar/Rose Quartz Metallic two tone - 3.8 V6 - Rescue
1988 Cougar LS - Cinnabar/Rose Quartz Metallic two tone - 5.0 V8 - Survivor

 

Anyone Need Body Sections? 88 Turbo Coupe

Reply #8
I could use the body mounts for the quad shocks, if they're available.

Anyone Need Body Sections? 88 Turbo Coupe

Reply #9
Quote from: cj750;455739
I could use the body mounts for the quad shocks, if they're available.

I should have those. Let me check today.

Anyone Need Body Sections? 88 Turbo Coupe

Reply #10
Quote from: cj750;455739
I could use the body mounts for the quad shocks, if they're available.

PM sent

Anyone Need Body Sections? 88 Turbo Coupe

Reply #11
Ok, recovered from the last rain episode.  Still interested in those quarters if you still have the car.
T-Birds can't fly.  Ask how I know...

Anyone Need Body Sections? 88 Turbo Coupe

Reply #12
Quote from: Lodemia;456049
Ok, recovered from the last rain episode.  Still interested in those quarters if you still have the car.

Still have it. Let me know what you need.

Anyone Need Body Sections? 88 Turbo Coupe

Reply #13
On both sides, before and after the rear wheel.  Cut through the grey so that the weld is under the trim piece.  in front of the wheel, the body is seamed at the rocker, so you may need to drill the spot welds on the inside or cut through the rocker panel.  My rockers are actually solid, it's the section of the quarter panel above that's the issue. My inner fenders are solid after blasting, too.

PM me with a price.  Thanks!
T-Birds can't fly.  Ask how I know...

Anyone Need Body Sections? 88 Turbo Coupe

Reply #14
what kind of shape was the interior in overall?








1983 FORD THUNDERBIRD HERITAGE 5.0
2008 SAAB 9-7X AERO 6.0 (LS2) 1 0f 554 Made
2011 FORD FLEX SEL Family Hauler