Skip to main content
Topic: Parting out 88 5.0 sport (Read 2596 times) previous topic - next topic

Parting out 88 5.0 sport

Reply #15
I had someone interested in it, but I have pm'd them and have not gotten any response in weeks. So if you want it its yours. PM me with your exact needs. Thanks

Parting out 88 5.0 sport

Reply #16
interested in the fuel rail and hard lines that go along the frame, is it rusted on the frame rail
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Parting out 88 5.0 sport

Reply #17
daminc you have a pm

Parting out 88 5.0 sport

Reply #18
I will be in Carlisle for the ford show,so if anybody needs any small items, that will also be there, let me know and I can bring them with me and save shipping. Thanks ,Eric

Parting out 88 5.0 sport

Reply #19
I need the quad shock brackets from a turbo coupe. just the part where they bolt to the frame. I already swapped in a TC rear and I'd love to be able to install a set of axle dampers to go with it.

turbo charged 94 Cobra engine/440cc injectors/megasquirt /5 speed swapped (T5)/maxbox upper intake/70mm PP throttle body/AJE coilovers/2003 Mustang control arms/S.T. sway bars/ES rear control arm bushings/11" brake conversion/manual rack conversion/8.8 TC rear with rear discs and a welded diff/3.73 gears/PLX wideband/199mph speedometer/Aeromotive FPR/CNC hydraulic hand brake/cobra R wheels/....ect.

Parting out 88 5.0 sport

Reply #20
Interested in the dash harness, complete, and uncut. Name your price. PM sent :)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Parting out 88 5.0 sport

Reply #21
brian163 you have a pm

Parting out 88 5.0 sport

Reply #22
I could use a accelerator cable if available?
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Parting out 88 5.0 sport

Reply #23
Have any good front and rear bumpers? I don't care if they are lx or turbo coupe may new a header panel also.
[SIGPIC][/SIGPIC]
88 tbird lx 5.0 ho t5 swap
04 dsg gt

Parting out 88 5.0 sport

Reply #24
Quote from: 88hotbird;416900
Have any good front and rear bumpers? I don't care if they are lx or turbo coupe may new a header panel also.

 
If he doesn't have one, I might. I'm pretty sure I have a front bumper. Def should still have a rear and I know I have a couple tc header panels.

Parting out 88 5.0 sport

Reply #25
Lllaaasssttt  ccchhhaaannccceee>>>car will be going to the crusher on saturday  6/15

Parting out 88 5.0 sport

Reply #26
CAR IS GONE...................................................................................MODS please delete thread....................

Parting out 88 5.0 sport

Reply #27
but you said tomorrow it was going... . was going to ask about the harness and the floor shifter bracket.

Parting out 88 5.0 sport

Reply #28
I still have the complete uncut engine harness with computer, complete shifter, and some other misc parts.

Parting out 88 5.0 sport

Reply #29
tc harness or 5.0  harness...
if 5.0,,, i am game all day long,, need one real bad