Skip to main content
Topic: Guy from work wants to race! (At the track of course) (Read 1793 times) previous topic - next topic

Guy from work wants to race! (At the track of course)

So why do I feel like this is not going to go in my favor?!

  What I know about his car: 80's Pontiac with a "crate" Buick 3.8L, "mildly" hand-ported heads(Gasket match, etc), stock cam, 650Cfm Carb. Stock exhaust.
 
Rear axle from a Camaro with 3.83's? Automatic trans with a 3k Stall converter.

I haven't run my car at the track with the 5-Speed and the 3.73's yet, nor did I have the carb dialed. (It still isn't completely, but it's better) It ran a 17 something previously(2.73's and a C5)

  I figure I'll step up the metering rods again(I backed them down for cruise economy), and I already bumped the springs up, so I should get really good fuel flow, but I have a feeling that if nothing else, the fact that he's driving an auto will kill me, since mine doesn't shift all that great(Unless you reef on it, which I will be doing).

  Anyways, I'm starting to get excited, I just figured I would post up and gather thoughts.

  P.S. If anyone local wants to meet at PIR next month, hopefully CadTbird will come down and we can have some fun!
1983 Tbird with '03 Split Port V6 motor swap done! Headers, dual exhaust, 500CFM Edelbrock, 3G upgrade, Electric fan. 3.73 Gears and an FRPP Limited Slip. Five lug complete! 5-Speed conversion complete! Standalone Fuel Injection in progress...

Guy from work wants to race! (At the track of course)

Reply #1
Good luck and have fun
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

Guy from work wants to race! (At the track of course)

Reply #2
Quote from: thewestie;361268
Good luck and have fun

Haha, yes, I do believe that counts as good advice.

 I'm also thinking that I may try and get an exhaust cutout installed before the race, they seem to be on sale currently. I also found out that the Pontiac has an Edelbrock intake. I am so screwed! (Maybe my exhaust cutout will do it for me though!)
1983 Tbird with '03 Split Port V6 motor swap done! Headers, dual exhaust, 500CFM Edelbrock, 3G upgrade, Electric fan. 3.73 Gears and an FRPP Limited Slip. Five lug complete! 5-Speed conversion complete! Standalone Fuel Injection in progress...

Guy from work wants to race! (At the track of course)

Reply #3
As long as its just for bragging rites just don't break the car :)
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done