Skip to main content ↑ ↓
Topic: since I am new to this whole site..I was wondering (Read 915 times) previous topic - next topic

since I am new to this whole site..I was wondering

Has anyone done a straight conversion from the digital dash to mechanical gauges? and if so what is involved?:confused:

since I am new to this whole site..I was wondering

Reply #1 –
It can be done , the plugs on the back are different between the 2 setups so some re-pinning of wires has to be done and the anolog has only one plug where the full digital has two so one plug gets tucked away and is not used .
 An EVTM is invaluable for doing this sort of modification :D
Fox-less at the moment

since I am new to this whole site..I was wondering

Reply #2 –
Quote from: hypostang;324465
It can be done , the plugs on the back are different between the 2 setups so some re-pinning of wires has to be done and the anolog has only one plug where the full digital has two so one plug gets tucked away and is not used .
 An EVTM is invaluable for doing this sort of modification :D


After doing my dash swap and trying different gauge clusters, I have the compulsion to say piece of cake.... Actually installing and wiring my 95 Mustang dash cluster into the Tbird was the easiest mod and most gratifying mod I have done. Tbird digital to buttstuffog is even more of a piece of cake!