Skip to main content
Topic: Wanted: pre '86.5 motor mounts (Read 625 times) previous topic - next topic

Wanted: pre '86.5 motor mounts

Looking for the pre '86.5 style motor mounts.  Don't need to be in any good shape, I'm just looking to copy the dimensions from them.  If anyone has an old pair laying around that haven't been thrown away yet, let me know.
1987 TC

Wanted: pre '86.5 motor mounts

Reply #1
I have the bottom half, I just need the top half that bolts to the block.  Thanks in advance.
1987 TC

Wanted: pre '86.5 motor mounts

Reply #2
I added a pic of where the PO had torched the mount off the engine from an '84 GT.
1987 TC

Wanted: pre '86.5 motor mounts

Reply #3
I'm gonna go look for mine in the garage and if I find them I'll measure them/pic them.  I need them to put my motor in though so you can't have them.  Don't know if I still can find them or not.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

Wanted: pre '86.5 motor mounts

Reply #4
Are these the pieces you need?
Fox-less at the moment

Wanted: pre '86.5 motor mounts

Reply #5
My bad for not saying, but I found a set a couple days ago.  Thanks for the pic, too.
1987 TC

Wanted: pre '86.5 motor mounts

Reply #6
Was gonna say, if I'd seen this quicker, I still have the mounts from the HO that went into my car...they're broken, but I think might have sufficed for what you wanted them for...lol
Glad ya got what you needed though :D
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)