Skip to main content ↑ ↓
Topic: parting out 88cougarxr7 5.0L (Read 2013 times) previous topic - next topic

parting out 88cougarxr7 5.0L

Reply #15 –
PM sent
[SIGPIC][/SIGPIC]

parting out 88cougarxr7 5.0L

Reply #16 –
i will be selling the motor transmission and computer for about 3000.00 although i will not be able to ship it. the trans has been rebuilt and has a shift kit in it. the motor has 98k on it and has no problems.


Door

Reply #17 –
..

parting out 88cougarxr7 5.0L

Reply #18 –
Quote from: mcb82gt;320578
I need the seatbelts and sleeves that bolt to the driveling tunnel, If they are in great shape and grey?

Both sides.

If its and automatic car and floor shift, what about the leather shift handle.  Is it in great shape?


Any update?
Mike

parting out 88cougarxr7 5.0L

Reply #19 –
Mike the seat belts are gray and in great condition I'm asking 15 plus shipping for them. Did you need pictures? I'm not always able to get on here so please email me at kiekie124@aim.com.  Also the floor shift  is in decent condition.


parting out 88cougarxr7 5.0L

Reply #20 –
Sam,I'm intersted in the console lid and the seats.How much do you want for them?PM me when you can,.....no hurry. Shipping can be done by bus for cheap.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

parting out 88cougarxr7 5.0L

Reply #21 –
Mostly the console lid.How much for that?PM me.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

parting out 88cougarxr7 5.0L

Reply #22 –
Quote from: Samantha;321347
Mike the seat belts are gray and in great condition I'm asking 15 plus shipping for them. Did you need pictures? I'm not always able to get on here so please email me at kiekie124@aim.com.  Also the floor shift  is in decent condition.


email sent.:D
Mike

parting out 88cougarxr7 5.0L

Reply #23 –
There is still alot to be sold.  the seats im asking 90 a piece plus shipping unless you are close to come get them. also the motor trans and computer 2500 .





those are just some pictures of the car. the body is in very good shape it has minimum rust. please email me if you are interested in anything. kiekie124@aim.com

samantha


parting out 88cougarxr7 5.0L

Reply #24 –
I'd be interested in the door panels and the shifter if they are available. Picking up some parts this weekend in Brooklyn Hts., could make 2 stops.
Thanks, Darrel
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

parting out 88cougarxr7 5.0L

Reply #25 –
Quote from: boss9;321625
I'd be interested in the door panels and the shifter if they are available. Picking up some parts this weekend in Brooklyn Hts., could make 2 stops.
Thanks, Darrel


May have had a brain fart ! Are the door panels interchangeable between the the Bird and the Cougar ?
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

parting out 88cougarxr7 5.0L

Reply #26 –
if vinnie doesn't take the console lid ill take it. Wife put a tv in the car one day and ripped my console lid.
2001 Buick Regal LS (DD):hick:

Got that fox rash again!

-Resident smartass! :ies:

- Don't listen to the naysayers. For every person who actually helps with your project there will be 10 who will discourage you all the while thinking that they are helping. 99% of all people have good intentions. That doesn't make them right.- XR7 Dave - SCCOA.Com

parting out 88cougarxr7 5.0L

Reply #27 –
Quote from: boss9;321628
May have had a brain fart ! Are the door panels interchangeable between the the Bird and the Cougar ?


I have cougar door panels on my tbird
Fox-less at the moment

parting out 88cougarxr7 5.0L

Reply #28 –
Quote from: hypostang;321724
I have cougar door panels on my tbird



Thanks Hypo, did some research and found they will fit.
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

parting out 88cougarxr7 5.0L

Reply #29 –
How are the taillights,actually the right one. And how much?
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +