Skip to main content ↑ ↓
Topic: What I did today (Read 1318 times) previous topic - next topic

What I did today

An upper intake plate that  I believe is from  from a Crown Vic that I am going to use on my bird just to be different,
Fox-less at the moment

What I did today

Reply #1 –
I like that a lot.Especially without the "EFI" that most of those plates have.Nice work.I'm working on polishing a few for Ebay.The Sport has needs ya' know.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I did today

Reply #2 –
That must be an '86 plate. I like the '86 HO plate as well. It looks like that plate but with HO under the 5.0
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

What I did today

Reply #3 –
I think it is from an 86 too, way back in the day I had a brand new 86 5.0 lx mustang coupe and I swapped the upper plate to the 87 style, and for the life of me I cannot remember what I did with the stock one :hick:
 I know I would not have thrown it out because I never throw anything away
 And Thanks guys I like it because of the lack of the "EFI" too
Fox-less at the moment

What I did today

Reply #4 –
I have 10 or 15 plates in the garage.I need to see if I have one of those.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I did today

Reply #5 –
lol thats nice man, I am about to go to shop so i can Paint mine today, its going to be red and black for a friends.... its the HO put one ill send pictures

What I did today

Reply #6 –
How are you guys getting the plates off?!

EVERYTIME i find a plate at the JY, I grab a torx bit and it ALWAYS BREAKS on the first screw. :mad::mad::mad:
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

What I did today

Reply #7 –
Take some PB Blaster and soak them first and buy better quality Torx bits.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I did today

Reply #8 –
Have fun getting them off in the rust belt...lol.:punchballs:
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

What I did today

Reply #9 –
Haha yeah I had to go to the store and buy my dad a one of that size, and when I used the new one it twisted it but didn't break.

What I did today

Reply #10 –
Well, I went to the Junk yard today , and I check all the fuel injected 5.0's and NONE had the plate I am using
 
 They had an 86 bird , Town Car and a Crown Vic  All had "EFI" on them.
Fox-less at the moment

What I did today

Reply #11 –
I'll look around at the yard next week while I'm there.If they have them,I'll polish them and sell them.I have a few others to polish as it is.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..