TFS Track Heat 1.460" Double valve springs, Chromoly retainers, and 10° locks

Topic: TFS Track Heat 1.460" Double valve springs, Chromoly retainers, and 10° locks (Read 612 times) previous topic - next topic

TFS Track Heat 1.460" Double valve springs, Chromoly retainers, and 10° locks

March 03, 2010, 07:20:56 PM

Used, but all in good shape. they wont work with stock iron heads, and even if they did these have too much seat pressure for my hydro flat tappet cam. Great upgrade for TW, Edelbrock, AFR heads though.

$100 takes it all

TFS Track Heat 1.460" Double valve springs, Chromoly retainers, and 10° locks

Reply #1 – March 17, 2010, 09:10:13 PM

ttt

TFS Track Heat 1.460" Double valve springs, Chromoly retainers, and 10° locks

Reply #2 – March 17, 2010, 10:41:33 PM

Are these the ones that come with the top end kit? Or the stand alone ones they sell as an upgrade for E7 heads?

TFS Track Heat 1.460" Double valve springs, Chromoly retainers, and 10° locks

Reply #3 – March 17, 2010, 10:51:10 PM

Read my first post again. If they were the upgraded springs I wouldn't have said they don't work on stock iron heads.

specs are HERE

TFS Track Heat 1.460" Double valve springs, Chromoly retainers, and 10° locks

Reply #4 – March 18, 2010, 03:04:32 PM

Got it. Those are the ones I had with my TFS stage 1.

I have a friend looking. I'll let him know.