tool box foam to shadow tools.

Topic: tool box foam to shadow tools. (Read 709 times) previous topic - next topic

tool box foam to shadow tools.

February 06, 2010, 02:18:32 AM

1'' foam so i can cut out tool shapes.

foam must be durable enough to lift out as it will be stacked atop another layer of foam with tools.

looking for 15''x18'' x 1'' which is the deminsion of my tote box.

looking to make approx 8 tiles.

tool box foam to shadow tools.

Reply #1 – February 06, 2010, 10:01:43 AM

I have some of this stuff left over from a speaker build. I think it would work well in this application. Don't really have much left myself but i purchased it from P.E.

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=260-525

tool box foam to shadow tools.

Reply #2 – February 07, 2010, 03:12:46 PM

9 layers would of 15''x18'' would be pretty expensive. Ive been trolling some foam sites, now that i have a little bit of time.

tool box foam to shadow tools.

Reply #3 – February 08, 2010, 10:22:59 AM

sent a pm

tool box foam to shadow tools.

Reply #4 – February 11, 2010, 01:16:25 AM

this looks like a good fit

http://cgi.ebay.com/ebaymotors/Mechanics-Rubber-Foam-Creeper-mat-1-Premium-Mat_W0QQcmdZViewItemQQhashZitem2c530169edQQitemZ190371162605QQptZMotorsQ5fAutomotiveQ5fTools

seems like the stuff i remember in the navy,, closed cell black foam that we had to paint on top with red then cut 1/4'' or so to lay the tool in.

tool box foam to shadow tools.

Reply #5 – February 11, 2010, 01:27:14 AM

and this is looking possible also
http://cgi.ebay.com/ebaymotors/Bedliner-Premium-Mat-1-Foam-Mat-for-Trucks-Vans_W0QQcmdZViewItemQQhashZitem2c53016d64QQitemZ190371163492QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

still looking into sancho's option as well.

gotta lot of little tools that need a home in my jenson roll around box

tool box foam to shadow tools.

Reply #6 – February 11, 2010, 10:32:42 AM

Nice finds.

tool box foam to shadow tools.

Reply #7 – April 24, 2010, 10:02:17 AM

4 sheet free sample arrived yesterday.

great stuff, starting on the tool layout today.

This can be a part of the bill of materials for a backup generator with sound deadening applied to the interior housing. I stumbled across this stuff while setting a 250kva gen in kentucky for Insight. Never really paid attention to the material since gensets only represent a small percentage of projects i manage.