Skip to main content
Topic: door panels? (Read 1322 times) previous topic - next topic

door panels?

has anybody every tried to adapt 87-88 door panels to a 83-84? My arm rests are all broke from the p.o. and i cant ride around with a nice car and no door panels anymore.

Thanks,
Chris

door panels?

Reply #1
If I remember correctly. it works, but you have to drill some new holes in the door for some of the panel clips.... (I think)
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

door panels?

Reply #2
now the second step would be to find some haha.

door panels?

Reply #3
what color? think I have a set of blue that could be re dyed or re-colored.


[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

door panels?

Reply #4
need a set of red, not sure how hard it would be to re dye them to red? anyone every done it? dye avalible for medium red interior?

door panels?

Reply #5
I have a set of grey ones.

door panels?

Reply #6
i got red but i dont think i can make money parting the car out.
[SIGPIC][/SIGPIC]
:america: An American Restoration. :birdsmily:
1987 Ford Thunderbird Sport (resting)
1993 Mazda Miata 1.6l (daily driver)

door panels?

Reply #7
got the door panels,
gonna do a write up eventually when i put them in for good, today was just the test fit,

Thanks Again Jerry!