Skip to main content ↑ ↓
Topic: Polishing 10 hole wheels. (Read 650 times) previous topic - next topic

Polishing 10 hole wheels.

Anybody ever seen highly polished 10 hole wheels?  If so, whats the best way to polish them?

Polishing 10 hole wheels.

Reply #1 –
I used a drill with a disc sander set up on it.I started with 80 grit,constantly moving the disc,never letting it stay in one spot,and smoothed the wheels really good,then,I went to 120,and 220 grit.After that,I wet sanded with 360 all the way up to 2000 and polished them.So shiny you could see yourself in them.They are long gone,but they did look great.10 holes are the easiest to polish.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..