87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc April 21, 2009, 11:29:32 PM I'm driving from Rochester, MN to Indianapolis, IN Sunday, May 3. If you want any of the parts listed below, I would be happy to meet along the route (Madison, Rockford, Indianapolis, Gary or Bloomington, Chicago, etc). Feel free to reply, PM or email with needs and/or questions. Some parts are Still In Car (SIC), noted below, so you could try them out in person before buying them if you wanted to. Thanks, Mike. Running Gear 1 - Good running 2.3T engine, currently in 87 TC, not sure of year - Sold 1 - Complete WC T5 conversion, everything you need, works good - Sold 1 - WC T5 5-speed - $100 (Sale Pending) 5 - T5 5-speed hydraulic bellhousings, no forks - $20ea 1 - Complete disc brake T-Lok rear, 4-lug, 3.55 - Sold 1 - Complete disc brake T-Lok rear, 4-lug, 5-sp Arizona car, very clean - $300 8 - Master cylinder assemblies, incl proportioning valve - $30ea 6 - Dual cooling fan assemblies, incl factory shroud - $30ea asm 1 - Rear sway bar w/lower mounting arms - $10 4pr - Rear coil springs - $10pr 1pr - Front coil springs, SIC - $20pr (Sale Pending) 1pr - Spindles, calipers (SIC) and freshly turned rotors - $50 for all 1 - Radiator, holds water fine - Sold Interior 12 - Power seat tracks (all functions tested) - $20 Driver, $40 Passenger 2 - Red, black rear package trays - $10ea 10 - Red, blue, gray A pillar trim (long plastic pieces) - $5ea 12 - Red, blue, gray rear upper and lower interior panels - $5ea 20 - Red, blue, gray door panels - $10ea, does not incl pockets, armrests, pull handles 3 - Red, gray consoles (bare) - $20ea Exterior 2 - Header panels, white and dark blue (missing tabs) - $75ea 6 - Rear bumpers, assorted colors - $25ea 10 - Hoods w/scoops, assorted colors - $50ea (dents) 1 - Passenger Fender, black - $50 3 - Trunk lids, assorted colors - $50ea 1 - Red spoiler, was on an 87/88 TC, says "Universal" on the bottom - $10 Rims/Tires - All rims are 4-lug Fox Ford 4 - 16" T-Bird snowflake rims w/py tires, incl T-Bird centers - Sold 4 - 15" Mustang aluminum 10-hole rims (bare), incl all 4 FORD centers - $60 set 1 - 15" Mustang aluminum GT turbine rim, no center - $20 Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #1 – April 22, 2009, 01:10:37 AM I wish I could find someone like you in my area. Good luck. Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #2 – April 22, 2009, 09:10:58 AM Quote from: Haystack;268551I wish I could find someone like you in my area. Good luck.x2:mad: Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #3 – April 22, 2009, 11:04:15 AM x3 Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #4 – April 22, 2009, 11:44:36 AM Quote from: FLSTCI71;268539.... 20 - Red, blue, gray door panels - $10ea, does not incl pockets, armrests, pull handles Hey Mike... Where are you hiding the armrests? :) I was thinking of emailing you to see if you had any to reunite with that blue console and seat tracks I bought from you.Might be interested in a set of springs (f&r) if the shipping isn't crazy stupid? 32462 or greyhound? Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #5 – April 22, 2009, 12:02:16 PM Is that a t-5 for a turbo 4? just curious. Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #6 – April 22, 2009, 12:49:45 PM Quote from: doodaa;268610Hey Mike... Where are you hiding the armrests? :) I was thinking of emailing you to see if you had any to reunite with that blue console and seat tracks I bought from you.Might be interested in a set of springs (f&r) if the shipping isn't crazy stupid? 32462 or greyhound?Man, I wish we were hiding piles of NOS armests, map pockets and pull straps! I have two kids in college and that would pay for it. :D We might have some blue arm rests around, but they'd be in "average" condition. It's really tough to find nice ones. Shipping on springs is crazy stupid. Do you have an easy way to get an estimate from Greyhound? We have a terminal around here, but they don't handle shipping estimates. I went there with a bumper and they told me I had to go the web and schedule everything there. It didn't seem very easy to me, so I got sidetracked and never followed up.Quote from: 86XR7project;268612Is that a t-5 for a turbo 4? just curious.Yes, the T5 is from a Turbo Coupe, BUT I did not personally pull it. I can't tell you I drove it myself, so it's $100. P.S. There is a sale pending on it. Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #7 – April 22, 2009, 02:13:42 PM Can you shoot me a pic of the 'average' condition one? I'll pm you the email... I've got nothing on the passenger side at this point, literally. The one that was on there was in such bad shape I decided trying to figure out how to reattach it to the panel was a waste of time. I don't even care if it matches, just want something there so my passengers don't need a tetb-hole shot if they rub against the door handle. Never mind the springs.... greyhound wants $35/25 lb package or about $90 for $100 lbs in one box. Unless they're a lot lighter than I think they are it's not going to be worth it. Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #8 – April 22, 2009, 03:19:15 PM I figured the springs would be too costly to ship. That's too bad. So you need the big long plastic piece of the passenger arm rest and the little pad that mounts on it too? I'll see what I can find and snap a pic for you. Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #9 – April 22, 2009, 04:16:17 PM Quote from: FLSTCI71;268640I figured the springs would be too costly to ship. That's too bad. So you need the big long plastic piece of the passenger arm rest and the little pad that mounts on it too? I'll see what I can find and snap a pic for you.I can actually make due with the pad I have if the 86 base ones are the same, the one I have is decent but it's missing a clip. If the one you turn up is in real good shape I'd probably take it too though. The long plastic piece is what took most of the damage, the clips are all broken off. Almost as if someone did it deliberately... Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #10 – April 22, 2009, 06:41:10 PM Quote from: doodaa;268646I can actually make due with the pad I have if the 86 base ones are the same, the one I have is decent but it's missing a clip. If the one you turn up is in real good shape I'd probably take it too though. The long plastic piece is what took most of the damage, the clips are all broken off. Almost as if someone did it deliberately...I don't know about deliberate. I've seen some pretty nasty arm rests. Anyway, send me a PM with your email and I'll get some pics for you. Thanks, Mike. Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #11 – April 23, 2009, 08:27:50 AM Springs really don't cost that much to ship.I sent Daminc a couple of sets. Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #12 – April 23, 2009, 09:53:45 AM Quote from: vinnietbird;268768Springs really don't cost that much to ship.I sent Daminc a couple of sets.I may have found a set locally... but just in case, how did you ship them? And do you recall the weights and sizes? Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #13 – April 23, 2009, 11:36:22 AM I'd be interested in the front and rear springs as long as they are TC springs Quote Selected
87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc Reply #14 – April 23, 2009, 06:26:50 PM Hey...The bird is a bit banged up right now....I need an entire bumper structure - no foglights needed, those are still good. but with the energy absorbers. I also need a bumper cover...if you have one. and A good header panel. The cover and the Header panel id like to get as nice as possible structurally.... no cracks or tears....they would be refinished by a body shop so they have to be real nice. Im going to end up using those fenders I got from you too, since mine are now damaged. lmk Quote Selected
Topic: 87/88 Turbo Coupe Parts, Running Gear, Exterior, Interior, Wheels, Etc (Read 1012 times)
previous topic - next topic
