Skip to main content ↑ ↓
Topic: my project, new engine pic (Read 2539 times) previous topic - next topic

my project, new engine pic

Reply #15 –
If your car came with a 5.0,just get the Mass Air conversion kit (I got mine for cheap from Ebay) and do the job.It comes with the wire,plug,ends for the computer harness.easy to do and the kit is worth buying.The colors of the wires are correct,very clean and neat.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

my project, new engine pic

Reply #16 –
its a v6 car, thanks for the info :bowdown:
88 thunderbird, 306 ,E7 heads ported by me, explorer intake, 70mm professional products TB, 8.8 3.73 rear is finally in. 11" front brake upgrade. still need some stuff
some nice weather to work on stuff would be nice ^^^

my project, new engine pic

Reply #17 –
If your car is an '88, you will need a harness from an '88 5.0 Cougar/Bird. There are slight plug differences between '87 and '88.:D
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

my project, new engine pic

Reply #18 –
well the rear is in. Started on the motor, still have to get the heads done, 1.90, 1.60 valves. My friend gave me a HO cam so thats in. The machine shop suggested 1.7 pedestal rockers with the ho cam. Waiting on the engine harness and then ill pull out the 3.8. And as always still hunting parts before I can proceed any farther.
88 thunderbird, 306 ,E7 heads ported by me, explorer intake, 70mm professional products TB, 8.8 3.73 rear is finally in. 11" front brake upgrade. still need some stuff
some nice weather to work on stuff would be nice ^^^

my project, new engine pic

Reply #19 –
Sounds and looks like you're off to a good start.
When you post pics that are hosted on photobucket, just use the IMG code, not the one you've bene using, as the pics will come right up.

Good luck!
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

my project, new engine pic

Reply #20 –
One step at a time.Any progress is still progress.Pics as work occurs please.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

my project, new engine pic

Reply #21 –
Quote from: FordTruckFreeek;260136
Sounds and looks like you're off to a good start.
When you post pics that are hosted on photobucket, just use the IMG code, not the one you've bene using, as the pics will come right up.

Good luck!


thanks that works alot better :hick:
88 thunderbird, 306 ,E7 heads ported by me, explorer intake, 70mm professional products TB, 8.8 3.73 rear is finally in. 11" front brake upgrade. still need some stuff
some nice weather to work on stuff would be nice ^^^