First 302 rebuild....any tips? Reply #15 – January 27, 2009, 05:37:29 PM Quote from: 86Tbuzzard;253896What's wrong with the gt40p heads? worked fine for me and bunch of other people i know...Your right he will be just fine w/GTP heads just keep in mind headers.If he’s reusing his headers go w/the GT40 if his buying headers then either one. And the GTPs are easy to come buy since they were on 97 to 2000+ explorer and mountainers. Quote Selected
First 302 rebuild....any tips? Reply #16 – January 27, 2009, 05:51:16 PM i used shorty plugs with pacesetter shorty headers,modded one tube for clearance, and using 90 degree plugs wires...btw i do have a set of gt40p heads,and intake...see for sale section for details Quote Selected
First 302 rebuild....any tips? Reply #17 – January 27, 2009, 08:31:14 PM Hit the gasket surfaces with copper brushes. They'll get the dirt and stuff off, but won't scratch the surface unless it's aluminum. Quote Selected
First 302 rebuild....any tips? Reply #18 – January 28, 2009, 08:47:10 AM I called around to the junkyards at one point and was SOL. I'll try again. Is it only the early 97s that had the GT40s? I would drop a biscuit if I could get them for 100/ea let alone the intake for 150. Quote Selected
First 302 rebuild....any tips? Reply #19 – January 28, 2009, 01:30:34 PM Quote from: danzajax;254038I called around to the junkyards at one point and was SOL. I'll try again. Is it only the early 97s that had the GT40s? I would drop a biscuit if I could get them for 100/ea let alone the intake for 150. pm'd you Quote Selected
First 302 rebuild....any tips? Reply #20 – February 02, 2009, 05:33:20 PM Quote from: 86Tbuzzard;253896What's wrong with the gt40p heads? worked fine for me and bunch of other people i know...Quote from: Innes;253909Your right he will be just fine w/GTP heads just keep in mind headers.If he’s reusing his headers go w/the GT40 if his buying headers then either one. And the GTPs are easy to come buy since they were on 97 to 2000+ explorer and mountainers.Quote from: 86Tbuzzard;253926i used shorty plugs with pacesetter shorty headers,modded one tube for clearance, and using 90 degree plugs wires...btw i do have a set of gt40p heads,and intake...see for sale section for detailsGT40Ps work fine with the FMS headers for them. Heck I even run the standard 135* spark plug boots with no clearance problems. The only problem I have is getting the spark plugs out. You have to use a box end wrench on the spark plug socket as the ratchet won't fit around the header tubes. Quote Selected
Topic: First 302 rebuild....any tips? (Read 4310 times)
previous topic - next topic
