Skip to main content ↑ ↓
Topic: Parts for sale!! (Read 768 times) previous topic - next topic

Parts for sale!!

Brand new front mark VII rotor w/ abs- 60 plus shipping
Set of used mark VII front rotors w/ abs- Make Offer
Set of used mark VII front calipers- Make Offer
Set of used t-bird struts- Make Offer(non prc)
Mark VII LSC front sway bars(2)- Make Offer (larger then base bird, smaller then turbo coupe)
Set of Moog rubber control arm bushings(both arms)- Make offer
Set of Moog HD sway bar end links(front)- Make offer
Set of e7 heads, was told they were redone before I bought motor- 80 plus shipping
Complete HO conversion= 60mm TB, 60mm EGR spacer, HO upper and lower, e7 heads(another set), HO cam, 19lb injectors, mark VII SD computer, mustang shorty headers, mustang stock H pipe. Will include rockers, pushrods, lifters, all bolts, and anything else needed. - Shipping is gonna be HIGH for it all, but I can package seperate parts and shipping wouldnt be insane(as long as I get freight) looking to get a good amount for it all so make a REASONABLE OFFER. Might seperate.
Good 5.0 block. Unsure of miles but it was rebuilt and the cross hatching is still on the walls - 100 no shipping (can include crank, rods, and pistons for extra 75. Will seperate)
Brand new never used smog pump delete pulley- 50 plus shipping

Located in
warren, rhode island
02885
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #1 –
Got a tank sender for a full digital dash?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Parts for sale!!

Reply #2 –
nope only anolog
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #3 –
Do you have a spare fog light cover for the Marchals? I just need one, and I don't care how it looks as long as it's not broken.
Matt
1984 Thunderbird - 89 302 HO, GT40 heads w/ Trick Flow springs, E303 cam, Edelbrock Performer 289 intake and 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax lers, Mustang AOD and shifter, Mustang 8.8 w/ 3.73s, 3G alternator, Mustang front and rear sway bars, KYB 87-88 Turbo Coupe shocks and struts, and 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter w/ Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax lers, 3G alternator, aluminum radiator, and 3.27 gears.
 
1986 Cougar 5.0, 1989 Mark VII LSC 5 speed, 1980 Mercury Zephyr 4 door (sold)

Parts for sale!!

Reply #4 –
like the black covers? or the lens? I have 2 sets of them, and no covers.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #5 –
come on guys!!
these rotors can be used to do a 5 lug swap!!
Updated the list
Soon im gonna have to start making everything look nice and attempt to try evilbay, because I have to much junk, no money for car!

I am parting out my 88 mark VII so If you want/ need parts from it let me know!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #6 –
Check your PM's Boss.  :D
William

Parts for sale!!

Reply #7 –
replyed
Come on guys, make a offer no reasonable offer will be shot down!
my trans is shiznitting the bed so I need money asap...
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #8 –
Complete, uncut fuel lines?
(if you don't need 'em for the other Mark..)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Parts for sale!!

Reply #9 –
the only thing is
tbird lines are different
I tried installing them in the car
didnt work
sorry
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #10 –
come on guys i need money so bad.... Found a car that I wanna get for the 5 speed set up and exhaust
I need this stuff gone!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #11 –
Quote from: daboss351;246628
come on guys i need money so bad.... Found a car that I wanna get for the 5 speed set up and exhaust
I need this stuff gone!


Check your PM's Boss.  You never answered the last one I sent you.
William

Parts for sale!!

Reply #12 –
answered
guys PLEASEEE
rear brakes came apart last night.... I need cash....
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Parts for sale!!

Reply #13 –
prices are VERY negotiable
I have random TC interior parts as well
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07