Skip to main content
Topic: Assorted Cougarbird stuff for sale -- Update 3/20/2010 (Read 3195 times) previous topic - next topic

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #30
Are the cam, springs, locks, and retainers still available?
Lead me. Follow me. Or get the F#CK outta my way!


1988 Cougar
(the $360 beater)

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #31
Yes they are ;)
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #32
How much more aggressive is the cam you're selling than my E303?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #33
Many would compare theTFS stage 1 to the b cam.

The lobe profiles between the two are very similar.  Install it with a 4 degree advance in some GT-40's ( check PTV of course ;) ) and you'll most likely notice a slight increase in MPG.  It pulls hard up top.  Almost stock idle when I dialed it in @ 900 in park....
It likes a 2800-3000 stall when you put it in front of an automatic.  Trick Flow say 22-2400.  That's NOT enough.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #34
More than my flat tops will allow.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #35
TFS-1 cam specs:

Intake Duration at 050 inch Lift: 221
Exhaust Duration at 050 inch Lift: 225
Duration at 050 inch Lift: 221 int./225 exh.
Advertised Intake Duration: 275
Advertised Exhaust Duration: 279
Advertised Duration: 275 int./279 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.499 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in
.
Valve Lift with Factory Rocker Arm Ratio: 0.499 int./0.510 exh. lift
Lobe Separation (degrees): 112

E-cam specs:

cam lift.311 int exh .311
valve lift .498 int exh .498

max lift intake 110* exhaust 110*
valve setting. .000 intake exhaust .000

cam timing @.004 tappet lift
intake opens 28* btdc closes at 74* abdc duration is 282
exhaust opens 68*bbdc closes 34* atdc duration 282

cam timing @.050 tappet lift
intake opens at 0* btdc closes 40*abdc duration 220
exhaust opens 40* bbdc closes 0* atdc duration 220

Similar duration@ seat and @ .050"; the TFS has a slightly higher ramp rate and a bit more dwell over the nose.

When your valve(s) are open -- either the exhaust or intake -- where is the piston in the bore?



Don't rule it out 100%...
Do you know what your PTV clearances are as of right now?
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #36
Bumpage -- New Price $185 shipped to lower 48 for cam/springs/locks/retainers.  :)
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #37
Would this be something I might want for my car?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #38
That all depends on the rest of your setup to be honest.  I would NOT recommend this cam for e7 heads.

What are your plans?
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #39
I have been looking for a diff set of heads (GT40) for the 87, since the vert will now be mainly a cruising car. Thinking mabe I could put a little more muscle in Project Evolution
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #40
It would work, but be even better if they were ported....
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #41
im guessing the piece around the column that has the lil cable to let you know when your in p,r,n ect....  i know  i just broke mine when i did the 199mph speedo conversion=]  its amazing how well (and good) it looks seeing it hit over 85 mph digital

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #42
Bump -- Items are in first post ;)

Thanks for looking!
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #43
Bump.

$170 takes the cam/springs/locks/retainers  ----That's with shipping.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Assorted Cougarbird stuff for sale -- Update 3/20/2010

Reply #44
Sale pending on cam/springs/locks/retainers  :)
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!