Skip to main content
Topic: Thunderbird parts (Read 2301 times) previous topic - next topic

Thunderbird parts

I have a 1987 thunderbird sport. The drivetrain has been taken out, but there are some usable parts remaining. A lot of interrior parts are left as well as body moldings and hood/ trunk. Post up requests of what you need and ill let you know if its any good. Car had a full digital dash and the engine harness is up for sale to. The dash pad is mint, so im keeping it.

I'm not looking to make a lot of money here, im more than reasonable on the prices.

I also have a 1988 v6 engine and harness for sale. The engine runs good, with 80k miles on it. Head gasket was redone about 2 years ago. I'm keeping the alt. but if someone needs valve covers or anything, let me know. Also the egr stuff the brass looking circle and the little box that controls it are about 4 months old. I have the reciept, they were over $150 together. Make me a reasonable offer.

Car is in central mass, mass

I also have an 87 5.0 EEC harness if you need it. I know they go for around 125-130, how about $85?

Also have a set of american racing ar-39 wheels. Those "hotwheels" wheels. $250. Pics availible
John

Thunderbird parts

Reply #1
I need the lower dash moldings that go on either side of the steering column. 

I also need the piece that goes below that and covers the fuse area-ish.

What shape are the window channel weatherstripping?  Mine is completely shot.  This is what the window rolls up into...

Let me know if you have any questions.

I'm in Lincoln, NE 68526

thanks!
===85BIRD===
:birdsmily:

Thunderbird parts

Reply #2
you emailed me on the craigslist add on my E7 heads.
DO you still need anything? I'm stripping my mark 7 for the new one, so I can hook you up with parts
Let me know
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Thunderbird parts

Reply #3
Quote from: 85bird;241223
I need the lower dash moldings that go on either side of the steering column. 

Alright, I found the trim pieces you requested. Two are blue, and one is grey. The bottom one which connects the two is grey. There is no visual damage.  If you give me your email, I'll attach a picture of them to confirm. My email if jpc647@charter.net

As far as the window channels, I know the car doesn't leak. But I'll have to have to explain how they came out, I have broken them before in the boneyard. Also, the car is being "used" to hold spare parts, but I'll be getting rid of it in a couple weeks once my engine swap project is done. Thats when I'll remove these, I dont want the car to start leaking all over my parts.


John C.

Thunderbird parts

Reply #4
what color is the interior?
1987 TC

Thunderbird parts

Reply #5
it was grey, but some of the dash pieces are blue...

Thunderbird parts

Reply #6
I may be interested in the back part behind the rear seat.  AKA package tray.
1987 TC

Thunderbird parts

Reply #7
Just let me know and we can do all the parts together.  I have found the two trim pieces that are blue.  But still interested in the one that is gray.

Thanks, man.
===85BIRD===
:birdsmily:

Thunderbird parts

Reply #8
I would like the top (elbow pade) if its in good shape.
Please email me price and shipping.

1mwitkowski@comcast.net

Thanks
Mark w

Thunderbird parts

Reply #9
How are the door panels, Armrests, Door Speaker Covers and the little basket (gone brain dead, can't think of what you call that) that connects at the bottom of the Door Speaker Covers.

Tail lights and complete headlights with park and turn signal.
[SIGPIC][/SIGPIC]1987 Turbo Coupe
LenTech Strip Terminator Valve Body AOD, 302 Stroker (cid 347) 10:1 Compresion
Ford Racing Cast 3.40 Crank Balanced, Pioneer Forged 5.4 Rods, Mahle Flat Top Pistons 4.40, Edelbrock Performer RPM Alluminum Heads
Ford Racing 220 Duration 500 Lift Cam, Edelbrock Performer Intake Manifold , Edelbrock 800 cfm Performer Carb
Flowtech Headers, KYB Adjustable Shocks, Dyna Max Exhaust
355 Posi Rearend

Thunderbird parts

Reply #10
Quote from: mwitkowski;241606
I would like the top (elbow pade) if its in good shape.
Please email me price and shipping.

1mwitkowski@comcast.net

Thanks
Mark w


Do you mean on the door? What are you talking about?

Thunderbird parts

Reply #11
Quote from: CustomT;241609
How are the door panels, Armrests, Door Speaker Covers and the little basket (gone brain dead, can't think of what you call that) that connects at the bottom of the Door Speaker Covers.

Tail lights and complete headlights with park and turn signal.


The door panels are in okay shape... They are not like turbo coupe ones... but normal ones. The armrests on the door to my knowledge were good. The speaker cover were in decent shape, as well at the map pocket.. I'll gather the pieces together this weekend send you a pic, and a price.

Sorry no headlights or tailights... they were used on my 88.

Thunderbird parts

Reply #12
Looking for a full digital dash instrument cluster.  Wonder if the 1987 is the same as the 1985.
1985 30th anniversary, original owner

Thunderbird parts

Reply #13
According to Coolcats.net, which is essentially Eric's genious, the clusters are the same.

Thunderbird parts

Reply #14
do u have the center concole for a stick?
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily: