Skip to main content ↑ ↓
Topic: dipstick length (Read 1223 times) previous topic - next topic

dipstick length

I need to know the length of a dipstick from a C5 out of a 86 cougar w/3.8L.  Does anyone know or able to go measure theres and let me know..

thanks
Doug

dipstick length

Reply #1 –
run a wire through till you hit bottom.

that number minus 1/8'' is probably a guess that will amaze you .

dipstick length

Reply #2 –
what about add length and full length? Im getting ready to fill the trans and may not have one by then?

dipstick length

Reply #3 –
the full heigth of the pan would be a good mark from the bottom of the wire up.

say your pan is 2 1/4'' deep, that would be the full mark on the end of the wire.
 

dipstick length

Reply #4 –
22" minus the handle. Thanks for reminding me to check my fluid.

dipstick length

Reply #5 –
The fluid level measured down from the top of the fill tube with the engine running:
Room temperture fluid, 20 1/2" to 21 3/4"
Warmed to operating temp, 19 3/4" to 20 1/2"