Skip to main content
Topic: 88cougar parts 6/24 New parts w/pics page 3 (Read 1799 times) previous topic - next topic

88cougar parts 6/24 New parts w/pics page 3

I'm in process of sing out an 88 cougar. I have many parts that need to go. So here is a list to kick things off.

88 base digital cluster complete with Auto tranny indicator cable still attached and working.$25+shipping
88 Ac/Heat control panel complete with rear window defrost switch.$20+shipping
88 Base Steering Wheel complete with Good Cougar center cap Horn-$25+shipping
88 PORNO RED base door panels missing arm rest" missing door handle cups" $10+shipping
88 red velor seat front and rear. The fronts have the headrest that bend front and back as well as up and down.  All the seating velor is in real nice condition.$100+shipping  If needed I might be able to sell just the skins and headrest. $50+shipping.
Non power seat tracks Driver and passenger $20+shipping
85-88 Door window defrost vents for the dash.$5/set+shipping
85-88 Passenger side Dash vent. $5+ shipping
85-88 Wood grain dash bezels Real nice condition. Complete set with Ash tray included. $30+shipping
88 PORNO RED interior plastics price depends on witch part!
Complete Dash wiring harness from 88 cougar "missing wiper motor pigtail. $50+shipping.
Also has real nice window trim around all three rear windows. Haven't removed it yet just looking for interest before I pull it.

All these parts are at my house in the state of Missouri some where near the Town of Branson.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

88cougar parts 6/24 New parts w/pics page 3

Reply #1
how's the fuel lines?
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

88cougar parts 6/24 New parts w/pics page 3

Reply #2
as far as I know they are fine. Haven't been under the car in awhile.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

88cougar parts 6/24 New parts w/pics page 3

Reply #3
pm sent
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

88cougar parts 6/24 New parts w/pics page 3

Reply #4
If you are eying that harness you better contact me. It is just about to become Copper to recycle.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

88cougar parts 6/24 New parts w/pics page 3

Reply #5
Base steering wheel? Whats a base wheel?

What condition?

Pics?
1988 Cougar LS 5.0 (currently parting out):cougarsmily:
1989 Mustang LX Notch 2.3 (Project):ford:

88cougar parts 6/24 New parts w/pics page 3

Reply #6
pm sent

88cougar parts 6/24 New parts w/pics page 3

Reply #7
the base cougar wheel is the one that looks like a stang wheel but has a cougar horn button
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

88cougar parts 6/24 New parts w/pics page 3

Reply #8
Just in case you guys need some pics to keep your eyes and brians happy here are some of the parts that I have listed.



notice the heater controls with all the switches.

84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

88cougar parts 6/24 New parts w/pics page 3

Reply #9
price on front seat skins, door panels to 24941?

88cougar parts 6/24 New parts w/pics page 3

Reply #10
Is the back of the steering wheel as clean as the front? Any hidden blemishes?

I am very interested.

How much would shipping be to 28762?
1988 Cougar LS 5.0 (currently parting out):cougarsmily:
1989 Mustang LX Notch 2.3 (Project):ford:

88cougar parts 6/24 New parts w/pics page 3

Reply #11
here are some more pics of things I have up for sale. Look close these pieces are in real nice shape.



let me if there is anything you are looking for. Also I'm planing on striping the motor and tranny. I'm wonder if anyone is looking for some GOOD 3.8 heads. They are from an 88 3,8 When the car was totaled for a 3.8 it ran like a champ.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

88cougar parts 6/24 New parts w/pics page 3

Reply #12
:rollin: How much for the feet?!:hick:
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

88cougar parts 6/24 New parts w/pics page 3

Reply #13
How Are The Seat Belt Plastics
[SIGPIC][/SIGPIC]

88cougar parts 6/24 New parts w/pics page 3

Reply #14
Quote from: V8Demon;221685
:rollin: How much for the feet?!:hick:

Those feet aren't for sale! Sorry man I've got to walk some how!

Any how here are some more pics of the parts I have up.

The seat skins haven't got a pic of the rear lower or the passenger side pulled just yet. But here are some shots of the Driver seat, arm rest, and headrest skins. Also the rear upper seat portion and the arm rest cover. I've had one offer on these but just in case they are here for all to see.


And now here is the rear lower seat skin


Also I have the stripped Center arm rest and the Headrest As you can see these are the head rest that tilt forward and back.


Here is the lower driver seat plastic and the dash pocket

Also witch seat belt plastics? the ones on the seats or the ones were the belt bolt to the floor. Also all these items are make an offer! I know the board doesn't like this but 1st come 1st served. No reasonable offer is refused! I'm just stripping the car and need this stuff to get outta my way.

Thanks for looking
Stuckman
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird