brake clutch assem. May 20, 2008, 06:25:03 PM Will a 87 foxbody mustang clutch and brake assembly go into an 87 cougar? Quote Selected
brake clutch assem. Reply #1 – May 20, 2008, 06:46:24 PM Yes, thats actually what most people use when swapping to 5spd since the TC used a hydraulic clutch. Quote Selected
brake clutch assem. Reply #2 – May 20, 2008, 06:57:20 PM Is the mustang hydrulic or mechanical? Quote Selected
brake clutch assem. Reply #3 – May 21, 2008, 05:21:36 AM the mustang clutch set up is mechanical and as far as brakes depends how much of the assy your refering to.... im very sure there are writeups if your going from factory brakes to the 5.0 stang 11 inch brakes Quote Selected
brake clutch assem. Reply #4 – May 21, 2008, 07:47:50 AM I have an 87 cougar XR7 Auto and need to Know if a T5 from a 87 mustang will swap.I dont Know if any of the parts are interchangeable. Quote Selected
brake clutch assem. Reply #5 – May 22, 2008, 05:12:41 AM the T-5 from an 87 mustang WILL swap...things you will need would be manual pedal hanger assy, clutch cable, clutch kit and flywheel, pilot bearing, other than that it should bolt in to existing cross member. you would probably have to cut a hole in the trans tunnel for the shifter. Quote Selected
brake clutch assem. Reply #6 – May 22, 2008, 07:15:48 AM How about changing the harness-neutral safty switch?Will the pedals bolt in? Quote Selected
brake clutch assem. Reply #7 – May 22, 2008, 05:14:40 PM pedals will bolt in... i am not 100% sure on neutral safety switch. someone else can chime in... here is a little info on the T5 swap found on coolcats.net for ya and should clear up any questions for you http://www.coolcats.net/tech/advanced/t5_conversion.htmlhope it helps you Quote Selected
brake clutch assem. Reply #8 – May 22, 2008, 06:24:27 PM Thanks for the info-Thats just what I needed.Thanks Quote Selected
brake clutch assem. Reply #9 – May 22, 2008, 11:13:06 PM I doubt you would have to cut a hole in your floor if you already have a floor shift, i'm pretty sure that was standard with an 87 xr7... Quote Selected
brake clutch assem. Reply #10 – May 23, 2008, 04:34:44 AM Yes the auto trans has a floor shifter-so there is a factory opening. Quote Selected
brake clutch assem. Reply #11 – May 24, 2008, 06:53:55 PM I swapped my Cougar XR7 to a 5 5sp and yes you can wire up theneutral safety switch. My car shifter was in the floor so it was simple. Get a switch from a manual Stang and tap out each connection and wire it accordingly. Quote Selected
brake clutch assem. Reply #12 – May 26, 2008, 03:09:20 PM Thanks-I will take a look at it when it gets here,waiting on the car owner to pull the trans out.I am guessing the auto and manual use the same wire color. Quote Selected
brake clutch assem. Reply #13 – May 26, 2008, 04:51:08 PM Quote from: poppop;220761I am guessing the auto and manual use the same wire color.http://www.foxtbirdcougarforums.com/showthread.php?t=19268&page=4 Quote Selected
Topic: brake clutch assem. (Read 1659 times)
previous topic - next topic
