Skip to main content ↑ ↓
Topic: Boneyard run...TOMORROW MORNING !!! (Read 2590 times) previous topic - next topic

Boneyard run...TOMORROW MORNING !!!

I'm going to two huge yards Thursday.I'm letting everyone know early in case you need anything.Sometimes I can provide the parts requested,sometimes not.It doesn't cost to ask,but it does if I find your part(s).Most of you know I'm very fair (I think) on my prices,and I'll do my best to help you out.Let me know what you're needing,and I'll do what i can.I'll be making the list in my notebook 'til wednesday night (the deadline).
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #1 –
Vinnie-

If you come across any 80-82 XR-7s or TBirds, look at the wiper (w/ intermittent) and turnsignal stalks.  Chrome or black, as long as they are in good shape.

Also looking for the center console latch (I know not all have the console).

If you find one with a good dash pad (whatever color), I'd be interested in that too.

Thanks
Chuck
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon

Boneyard run...TOMORROW MORNING !!!

Reply #2 –
I'm looking for fuel lines for an '88...
I need the complete thing though, most jy's cut em at the tank end. :mad:
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Boneyard run...TOMORROW MORNING !!!

Reply #3 –
Mustang BLACK horn button. 88 style wheel, will add a pic in a second




barrowed from 1wldbird
If theres any mark 7's I need EVERY SINGLE LAST SCREW,NUT, CLIP, EVERYTHING for the trim on it BOTH SIDES. All my clips were not given to me, so I cant add the thick black trim back onto the car!! I also need the chrome wheel trim for the passenger side! If you were to get all that, I would be SOOOOOOOO freaking happy!!

And if you REALLY want to make me happy, cut the rear of the passenger fender out, and the front of the drivers fender!
I would 100% be in debt to you!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Boneyard run...TOMORROW MORNING !!!

Reply #4 –
Chuck,Mason,I got those items on the list....except for the fender parts.Those are a little expensive since they have to lift the car to the shop,cut them off and send them back,plus,they don't like cutting good front fenders when they can sell the whole thing.
Freek,I'll check on the lines for you.I had a complete set and Ifixyawata bought ALL of my fuel injection V-8 stuff.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #5 –
V8Demon,I'm still looking for the console arm rest for you....and the end caps.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #6 –
81-84 Mazda RX7 power window switch (79-80 might work, 85-86 definitely does not). Any color.

Boneyard run...TOMORROW MORNING !!!

Reply #7 –
Figured about the fenders! Not a biggy, the other stuff I need more!
Pmed you back, with some more items too
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Boneyard run...TOMORROW MORNING !!!

Reply #8 –
Mike,got you added to the list.

Mason,got the PM,and added your stuff.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #9 –
I need a console lid too and a switch cover plate for dual power seats.
Power antenna, good leather steering wheel too.

Boneyard run...TOMORROW MORNING !!!

Reply #10 –
Yo xjeffs,I'll check.The steering wheel would be the hardest part to find,but,I never know what I'll run across.It's all written down.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #11 –
Hey vin could you get PICS of this place sometime? LOL I'd just like to see all the laid-up thundercats there. Sure would be hard-pressed to find that 'round here!
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

Boneyard run...TOMORROW MORNING !!!

Reply #12 –
If I can remember,I'll take the camera with me.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #13 –
I know they are a tad large and shipping would be a bit but I really need to get some solid doors(87 Bird) Around here, western NY all I find are the same or worse than mine already.

Boneyard run...TOMORROW MORNING !!!

Reply #14 –
vinnietbird,
If it's not too late to ask... I am looking for the light cover for the driver's side front fender running light. Shipping is negoitable if you will/could even ship it here. Let me know if it's possible, I could even purchase it off you at CatJam!
 
I've attached a picture, just for clarity's sake.
 
Thanks!
[SIGPIC][/SIGPIC]
Operation: X Marks the Spot
5.0L SEFI, AOD, 8.8" 3.02 TracLok - All Stock