Skip to main content ↑ ↓
Topic: Front license plate holder for 87-88 non/TC T-Bird (Read 482 times) previous topic - next topic

Front license plate holder for 87-88 non/TC T-Bird

I stopped at the body shop today. The car is painted and they should be finishing it soon (trim painting, pinstriping, etc. left), and the guy asked me if I still want to use my front license plate holder as mine was busted up from being hit over the years. I'd rather use one that's in good shape rather than my old one. If anyone has one in good shape I could use it.
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Front license plate holder for 87-88 non/TC T-Bird

Reply #1 –
I have that in really nice shape.$25.00 shipped.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Front license plate holder for 87-88 non/TC T-Bird

Reply #2 –
Sounds fine to me. Should I send PayPal to the usual address?
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Front license plate holder for 87-88 non/TC T-Bird

Reply #3 –
Sold.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Front license plate holder for 87-88 non/TC T-Bird

Reply #4 –
Hey Vin, any word on it? I get my car tomorrow or Tuesday (depending on how long state inspection takes) but the guy at the body shop offered to put it on while I wait whenever it comes in.
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Front license plate holder for 87-88 non/TC T-Bird

Reply #5 –
Shipped it Friday (only day I was off befor the UPS Store closed).Stay  tuned,and let me know when it gets there.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Front license plate holder for 87-88 non/TC T-Bird

Reply #6 –
Still haven't gotten it yet :(
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Front license plate holder for 87-88 non/TC T-Bird

Reply #7 –
tell me when it gets there.It's in a white low profile rectangle box with some shredded car magazines in it for stuffing.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Front license plate holder for 87-88 non/TC T-Bird

Reply #8 –
It just came in today. I'll clean it up and have it put on next week. Thanks a lot, Vin.
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Front license plate holder for 87-88 non/TC T-Bird

Reply #9 –
Glad you got it.If i didn't already leave you feedback,I'll do it now.I really am slow about that.If you need anything,let me know and I'll do my best for you.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..