fuel injector/pump requirements

February 11, 2005, 11:51:39 PM

im planning on running a trickflow, (estimated) 408hp @ 6500 /388 tq @ 4500, engine with forged pistons, blah you know the drill........ my question is could i run a 19# injector? or is 24# highly required? could i run a 190 lph fuel pump or am i better off with a 225?

planning on running a 75mm tb& egr, trickflow 2.02/1.60 heads, trickflow 542/563 stage 2 cam, and a MSD 6AL ignition box

those who answer are liftin a great deal of stress off my shoulder :wtf:

Re: fuel injector/pump requirements

Reply #1 – February 12, 2005, 02:38:17 AM

Neither... A motor that size and hp should have 30lb inj....

Possibly could get by with a 190lph, but for a few $$ more you can get a 255lph pump.

Re: fuel injector/pump requirements

Reply #2 – February 12, 2005, 11:03:54 AM

ergh, thanks tom

i was just trying to see if i could se by with 24 #