Skip to main content
Topic: HELP ME! find this part number... (Read 3540 times) previous topic - next topic

HELP ME! find this part number...

ok so of course my  TV cable mount thing broke(plastic peice) i call up the dealership they havent a clue what im talking about they got the cable for 94$ well im not going to pay that and the cable is fine not stretched.......anyways i need the part number for the plastic lift tab that mounts to the throttle body lever...and pictures of this part would help i went to the aodexchange page they helped some what...i have the lift tab type tv cable not block type..i could have sworn i have seen a picture of the ford fix for the lift tab type sure i got the bushing but wrong part mines back asswards not the one where the cable pushes into a bushing on the throttle lever..i need the one where the pin is on the lever.....help please because i obviously cant drive till its fixed

HELP ME! find this part number...

Reply #1
so this is NOT what you have? :
 
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

HELP ME! find this part number...

Reply #2
mine has a hole dilled through and a cotter pin
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

HELP ME! find this part number...

Reply #3
this is the cable that i have.....

HELP ME! find this part number...

Reply #4
You have an 86?
One 88

HELP ME! find this part number...

Reply #5
yessir i do 86 5.0

HELP ME! find this part number...

Reply #6
86 was the only year to get that style TV cable.. is the plastic part replaceable?  Its been a while since I've seen one but I don't recall it actually coming off.
One 88

HELP ME! find this part number...

Reply #7
nah it dont come off

HELP ME! find this part number...

Reply #8
Hmm.. I called all my local parts stores looking for a better price on a TV cable.. and well none of them can get it.
One 88

 

HELP ME! find this part number...

Reply #9
lokar has them . It's what I'm using.
http://www.lokar.com/interior_pages/tc_kd.htm
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

HELP ME! find this part number...

Reply #10
I've got to get that little peg that fits into the throttlebody lever  because I have the '86 style cable as well.I'll contact them tomorrow.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..


HELP ME! find this part number...

Reply #12
for what its worth that looks like the same end on a turbo 350 kickdown cable or a 700 r4 tv cable end.
louie  :birdsmily:
[SIGPIC][/SIGPIC]       
My famous last words:
It seemed like a good idea at the time.        88TC R.I.P.      88 Sport build in progress

HELP ME! find this part number...

Reply #13
That looks like the end of a TH350 cable to me. Just go to the parts store and ask for a 79 chevy pick 350 motor 350 tranny cable one end of it has one.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

HELP ME! find this part number...

Reply #14
ok screw this stock cable ill just get the normal style cable for the 87's mount it and then drill out the peg in the TB lever and use the bushings i bought before realizing it had this funky cable..will this work....