Skip to main content ↑ ↓
Topic: Silly Stang (Read 1474 times) previous topic - next topic

Silly Stang

Hehe, I see this around school a lot, and it makes me smile every time.  I mean, since we always seem to be jacking thier parts... i guess it makes sense.

Silly Stang

Reply #1 –
I kinda like that if it had mustang centers it be nice
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Silly Stang

Reply #2 –
My older brother use to have a 88 LX 5.0L with those same TC wheels on it. Looked sharp when it was lowered a bit.
:birdsmily:

2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

Silly Stang

Reply #3 –
There's a very nice black Capri around here with polished TC wheels. It looks SHARP, except he put a Mustang nose and hatch on it...
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

Silly Stang

Reply #4 –
Weaksauce.  I think that the Capris looked nice as they were.  Call me crazy, but I like the bubble.

Silly Stang

Reply #5 –
Jerk probably stripped a nice TC of the motor/suspension/wheels for that stang. I hate that.

Silly Stang

Reply #6 –
Quote from: Aerobird Motorsports;139780
Jerk probably stripped a nice TC of the motor/suspension/wheels for that stang. I hate that.



My buddy did that for his car. I actualy gave him some of the parts to finish his car. I wouldn't mess with it. The thing handles like a slot car.


You also have to remember that car probly came with pony rims on it. He may have curbed it and found out the TC rims were cheaper to buy an entire set than one pony rim.

Silly Stang

Reply #7 –
It's not a 5.0 car, it didn't have Pony's.

I don't mind when they JY one together using a rusted/totaled TC, but there are FAR too many webpages with guys showing really nice TC's that they hack up for Stangs.

Silly Stang

Reply #8 –
Quote from: Aerobird Motorsports;139812
It's not a 5.0 car, it didn't have Pony's.


Then thats the nicest set of fake duals I've seen.

Silly Stang

Reply #9 –
Didn't all 5.0 Stangs have the 5.0 badge on the front fender?

And those duals could've easily been put on later.

Silly Stang

Reply #11 –
Not everyone likes the 5.0 on the fender. I had friends that removed them.

Point is neither one of us know if its a 2.3, 3.8, or a 5.0. I was just making a point that it could have had pony rims on it being the right year and all.

Silly Stang

Reply #12 –
With how ugly that paint is I highly doubt he took the time to remove emblems properly. Far more likely that it never had them as I see no evidence of them. That and it look suspiciously like a certain TF member's car.

Silly Stang

Reply #13 –
That's definitely no 5.0. If it was it wouldn't have ghetto tailpipes like that. Those are some ler shop job with cheapo chrome tips on the end.

Garrett H.
'94 F250 XLT- 4x4, 5 speed, 7.3 IDI Turbo Diesel, 4" intake, 4" exhaust, 5" turnout stacks, manual hubs, etc.
'87 Thunderbird Turbo Coupe
Engine, wheels, tires, etc!
Exhaust sound clip
Another clip

Silly Stang

Reply #14 –
I never checked to see if it's a 5.0 or not.  I'll see next week.