Skip to main content ↑ ↓
Topic: 87/88 TC nose (Read 1425 times) previous topic - next topic

87/88 TC nose

Im looking for a good conditioned 87/88 TC nose (headerpanel) and lowervalance (from the fenders front bumper and down) also in good condition with the arms not cracked or broken on the bottom of it.
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

87/88 TC nose

Reply #1 –
bump.
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

87/88 TC nose

Reply #2 –
look at post from me,maybe I got what you want.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

87/88 TC nose

Reply #3 –
Quote from: kitzdnm;105807
look at post from me,maybe I got what you want.



If you got one PM me with some details...

bump :dunce:
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

87/88 TC nose

Reply #4 –
:sleep:
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

87/88 TC nose

Reply #5 –
i got a header panel but it sthe one with the grill on  it its not the turbo coupe one. if you want it pm me . later
[SIGPIC][/SIGPIC]5.0 Standard
REBUILT MUSTANG AOD
Magnaflow mustang exhaust
BBK shorties
mark vii h pipe
BBK intake
KYB shocks , struts
moog springs

87/88 TC nose

Reply #6 –
sorry man,gotta be a 87/88 TC :cool:
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

87/88 TC nose

Reply #7 –
bump
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

87/88 TC nose

Reply #8 –
bump
:birdsmily:

[SIGPIC][/SIGPIC]
2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels

87/88 TC nose

Reply #9 –
might have what you need from this parts car that's heading to the s yard soon.
GT40p 5.0 w/ vortech @ 9.5psi, 400rwhp

87/88 TC nose

Reply #10 –
Why is it going?

87/88 TC nose

Reply #11 –
Bought it for the rear end, it's going in my 86 along w/ front brakes quick ratio steering rack, seats, console, and hood. Engine is going into a 87 Ranger.
GT40p 5.0 w/ vortech @ 9.5psi, 400rwhp

87/88 TC nose

Reply #12 –
Oh yeah, the wheels are for the 86, the parts car didn't come with wheels.
GT40p 5.0 w/ vortech @ 9.5psi, 400rwhp

87/88 TC nose

Reply #13 –
Quote from: 86elan;108667
Bought it for the rear end, it's going in my 86 along w/ front brakes quick ratio steering rack, seats, console, and hood. Engine is going into a 87 Ranger.



where are you located?

87/88 TC nose

Reply #14 –
Lincoln NE
GT40p 5.0 w/ vortech @ 9.5psi, 400rwhp