2.3 cam specs

Topic: 2.3 cam specs (Read 3137 times) previous topic - next topic

2.3 cam specs

October 22, 2004, 12:47:04 PM

anyone know intake / exh lift? duration? lobe center? and the cams never varryed rite? i dont think they did, just makeing sure tho

Re: 2.3 cam specs

Reply #1 – October 22, 2004, 12:52:51 PM

Wouldn't a 2.3T cam be different from one in, say, a Ranger?

Re: 2.3 cam specs

Reply #2 – October 22, 2004, 01:10:26 PM

i should have specified, i was refering to turbo motors. im looking into getting another tc and wanted to start some research, basicaly what i want from this is stock tc cam size, and maybe the name of a good after market cam.

edit** hears what i have so far, as you can see its some what off. like theirs sopposed to be more torque earlyier in rpm 240 ftlbs @ 3400 RPM

Re: 2.3 cam specs

Reply #3 – October 22, 2004, 02:33:32 PM

Go here http://www.merkurencyclopedia.com/ and click on camshaft on the left hand side. It will give you specs of a bunch of different cams. Hope that helps.

Jim

Re: 2.3 cam specs

Reply #4 – October 22, 2004, 02:39:08 PM

thanks, one of the guys off the turbo board sent me their to that helped alot, but now im still stuck with the above, usualy if i play around with the numbers i can get the factory or close to it rateing, i got my 2 v8's on the money with just putting in the numbers... cant for the life of me figure out y it wount "line up" with factory specs

Re: 2.3 cam specs

Reply #5 – October 22, 2004, 02:52:42 PM

Could it have anything to do with the fact that you have it set as roller lifters? I dont' know much about that stuff so I am not sure. But the stock cam did not come with the roller lifters.

Jim

Re: 2.3 cam specs

Reply #6 – October 22, 2004, 04:41:38 PM

From the '84 Shop Manual:

Lobe lift: Intake .2381
Exhaust .2381

Theoretical valve lift @ zero lash:
Intake .390
Exhaust .390