Brake Problems

February 01, 2012, 06:06:46 PM

Help OK I need some help. I have just had a complete break work over....New Front calibers, Roters and both break lines on the front replaced. The same with the rear. Then I found I had a leak in the upper ABS system/. It seems there is a crack or something that is letting the fluid run right out. The leak is located at the break pressure senor that is attached to the combo break valve. I have a 1988 Turbo coupe and have not been able to locate a part for it. Do any of you have a spare pressure sensor or the whole system. I am also hoping that I will be able to remove the break line as it is heavy rusted.

Thanks again for the help

Brake Problems

Reply #1 – February 07, 2012, 06:20:29 PM

Salvage yard only as far as I know if you are referring to the combination valve mounted to the inner apr0n under the master cylinder.

Darren